Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3830 949 75-76 440 4bbl
3830 733 74-76 440 4bbl
3698630 400 B 1973-78
3698830 440 RB 1972-78
3810230 360 LA 1975-78
4006530 400 B 1976-78
4006630 440 RB 1975-78
The ones below are 733 castings according to the numbers its 74 to 76.
Here is a 74-76 on ebay...
You need a tool that runs between the glass and trim that pulls the trim locks out.
Looks like this.. Slip it in the groove slide a pointy side in until you catch a lock then you rotate the tool until it releases the trim. There are several trim locks around the window.
These are very close but look a little longer.
https://www.ebay.com/p/2pack-Aftermarket-Dodge-D-body-RAM-Exterior-Molding-Retainer-Clip-Left-or-Right/12002737242?iid=132221463006
The number is correct but some other part may show up. I mean you can send it back if its wrong. I wish they would put pictures up..
Haa thats it.. check this out.. https://www.ebay.com/i/233247728432?chn=ps
Second item down on this page could be it. Called a glass run, They have no picture of it but the part number is the same.
https://store.mopar.com/1987-dodge-charger-base-gas_2.2_l_4-transaxle_automatic_3-body_hardware-quarter_panel/
You could try a pass through grommet. like this one. Not sure...
Hell, if you can register it do it. I mean hell its old and I don't think anyone would second guess an old car having a hodge podge of parts. I mean I have a 1966 with a 67 fender at that age I'm guessing it will get a pass.
Weird looking member :rofl:
Kinda looks like the bottom right 2 gaskets. Shown here. But looking at all the Dana rear ends none look like yours. 44,50,60 etc etc
Im trying to figure out what the 383 is made of.. Actually having some issues tuning it if i must be honest. Anyhow I have a picture of the rockers and would like to know is these are stock or something of higher performance.
First post translated...
TREATMENT to rehabilitation the wiring of a MONACO 77. I have the NEXT problem. The ORANGE wires manipulated by the dimmer are making the current flow SAME AS THE ROSES BUT TO THE BLACK CABLES DO NOT GIVE ANY CURRENT CURRENT THAT WOULD BE THE GROUP OF GROUND WIRES...