wwheel's latest activity
-
wwheel replied to the thread RTE voltage limiter.What would happen if the condenser failed? I can easily leave it out or maybe just unplug it. Bird 426, was your solid state IVR the... -
wwheel replied to the thread RTE voltage limiter.Just doing this on my '70 RR. On RTE's site, they say the condenser is not required but can be left on along with the insulator board...
-
-
It's been 11 years since I installed a RTE solid state regulator in my 66 cluster, but If I recall correctly, the factory internal gauge...
-
wwheel replied to the thread 1967 coronet dash board removal with glassin.Strangely the middle hole is smaller than the other five and is directly in the center. There must be a reason for that, not sure.
-
wwheel replied to the thread 1967 coronet dash board removal with glassin.Somewhat related - how many screws are used to attach the dash to the cowl below the windshield? I thought (5), but there is this sixth...
-
-
wwheel replied to the thread 70 glove box liner question.To finish this off: I removed the fuse block flap by removing the three staples. Used the same staples to resecure the bottom overlap...
-
-
wwheel replied to the thread 70 glove box liner question.I contacted Detroit and haven't heard back. I have bought many things from them and happy with their product line. I think they just...
-
wwheel replied to the thread 70 glove box liner question.will do.
-
wwheel replied to the thread 70 glove box liner question.Pretty sure I bought from Detroit muscle but not 100%. Looking at their website and their part, the tags look the same as what I have...
-
wwheel replied to the thread 70 glove box liner question.Thanks for the pic and yes, mine is made wrong. If you look at my pic, the flap is mounted on the same side as the slots along the edge...
-
wwheel replied to the thread 70 glove box liner question.You are correct and the flap should cover the rear of the block. But the short part of the flap where attached to the liner is in the...
-
I bought a replacement glove box liner for my '70 R Runner. Everything makes sense except for the cardboard flap that should cover the...
-
-
wwheel replied to the thread Air Grabber solenoid mounting?.Perfect! Thank you.
-
Anybody have pics of where the solenoid mounts for a '70 Plymouth RR? Seems like it is near the fuse block and on the inside of the...
-
wwheel replied to the thread Door window post support adjuster.I had the same problem with my glass installation being too tight. But I used new AMD glass and pretty sure the curve of that is too...
-
