• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. rick68b5

    Will 1968-1970 340 SB HP exhaust manifolds fit in a 1970 B- body?

    I would say yes being the k frame is the same 70 e and b body
  3. rick68b5

    One 383 cylinder head to be machined and gone through

    yeah thats nuts
  4. rick68b5

    23 Spline A833 Good Deal?

    Well it's not correct for your car and it's a 11 inch bellhousing witch is not correct but being it comes with the pedals bell and trans 1500 seems fair
  5. rick68b5

    Racer Brown......?

    I run many of Jim's cams no problems ever and I've never broke them in like they say to do I just start them set the timing and off I go and I've never had a issue
  6. rick68b5

    Sure Grips for 8 3/4

    There's a clutch style and a cone style 1969 was the switch year
  8. rick68b5

    400 stroker…470 or 512?

    Just do a 440
  9. rick68b5

    440 Oil Pump- Good Grief

    6psi idle I'd pull that motor down
  10. rick68b5

    A -833 LEAK

    Brewers is the best parts source
  11. rick68b5

    hemi 18 spline

    damn I'm looking for 136767
  12. rick68b5

    hemi 18 spline

    thats a 70 transmission do u know what the vin is on it?
  14. rick68b5

    " Bastard" u-joint #

    i have spicer conversion joints in stock
  15. rick68b5

    426 Hemi Blocks are back!!!

    do it anyway i got a 318 poly in my v code 70 rr
  16. rick68b5

    741 to 489 case swap Drive shaft and U joint question

    just use the combo u will be fine
  17. rick68b5

    741 to 489 case swap Drive shaft and U joint question

    yes there is i have the spicer part number at home
  18. rick68b5

    426 Hemi Blocks are back!!!

    just ordered one and a set of heads
  20. rick68b5

    Bad input shaft?

    input shaft looks fine but the stater is done i would replace that.
  21. rick68b5

    833 Conversion

    Cross member will be different unless u use a 70 or newer transmission with a long tailand bell is big block only I would just buy that new plus u need all the pedals linkage shifter and misc parts
  22. rick68b5

    Powertrax Loc Rite? Anyone use it, Pros/Cons

    I've had a lock rite in the front rear of my diesel drag truck it's a tank
  23. rick68b5

    Cylinder Heads Question

    The real heads are stamped on the alt boss
  24. rick68b5

    Cylinder Heads Question

    You can buy standard 915 and do that yes but I don't see it being cost effective to do it
Back
Top