Blackheart
Well-Known Member
- Local time
- 10:05 AM
- Joined
- Dec 20, 2010
- Messages
- 400
- Reaction score
- 232
- Location
- Burlington, North Carolina
I'm putting this scoop (see pic) on my 63 Fury, not because I wanted to but had to in order to close the hood with the carb setup I am using, but that's another story. From talking to people and looking at pictures I am going to put scoop supports in the front of the scoop. I am going to use a short Savoy hood spear so I am I can't really put a support in the middle like most I see in the pictures. I plan to use two, one on each side equidistant from the middle.
My question is what did you guys that have scoop supports use to make your supports? Is it hollow with a long bolt all the way through or threaded on each end? I am making a cruiser/show car with no intention to race it. I want it functional but also something that looks good as well.
![63 New Scoop.jpg 63 New Scoop.jpg](https://www.forbbodiesonly.com/moparforum/data/attachments/165/165292-b67d9670b4450f1316bfcbac4f77f7b1.jpg)
My question is what did you guys that have scoop supports use to make your supports? Is it hollow with a long bolt all the way through or threaded on each end? I am making a cruiser/show car with no intention to race it. I want it functional but also something that looks good as well.
![63 New Scoop.jpg 63 New Scoop.jpg](https://www.forbbodiesonly.com/moparforum/data/attachments/165/165292-b67d9670b4450f1316bfcbac4f77f7b1.jpg)