Search results for query: *

I missed the inner plug on my 318 poly rebuild (I let the machine shop pull the galley plugs as my tool broke). It is in the rear under another plug! I was able to install the missing plug through the distributer hole in the block! Engine was in and started-low oil pressure was the result. Mike

Hammering on the axle in place can damage the tapered roller bearing. Remove the axle and press them out. The drill may have worked to remove the tension and weakened the fit but, the holes must be centered and opened up to the root diameter of the splines of the stud. Mike

The part has been discontinued by CP. Mike

No steel shim with aluminum heads. Did the head manufacturer not recommend their choice of gasket? Mike

That could be the correct part! Where can I find it? Thanks! Mike

It has disintegrated. I decided to make one though. First attempt proved I can make it work, so I'll change some dimensions tomorrow. I am using Delrin plastic and my lathe. Thanks for the response. Mike

OEM starter relay connector. Mike

Hi fellas, The air inlet throttle valve on my DA broke. Has any one found a replacement part? CP has discontinued production of this little plastic item. KF124233. Mike

Ma Mopar put the port in the intake for a reason. It works in millions of engines. The intake location is a better choice. Plug fouling is just a coincidence and bad luck. Mike

What is your definition of a driveline? Mike

They made 10s of thousands of RRs. Do what you need for your comfort. In a few years our cars will not be worth squat. Keep enjoying yours as long as possible. Mike

Time. Mike

I've found that black weatherstrip adhesive works well. Mike

I had them on my snowmobile trailer for years with good results. No use is harder on steel than Michigan winter roads. Mike

I paired a 727 (reverse pattern manual VB) with a GV OD for my 65 with 750# torque. 3.55 gear. Mike

Yes. Mike

Well, I don't see any heater hoses, there appears to be a mud dabber nest in the air cleaner to breather hose, no PVC hose and the valve is broken. I would get some help and prelube the engine before trying to start, to be safe. It looks like the top radiator hose is off the radiator, probably...

Hell, I guess I didn't even see "sway bar"!

What is a "end link"? Mike

.100" aluminum fastened in with rivet nuts and 10-32 screws. Mike