Search results for query: *

My 70 b-body convertible's roof line, looking at the side windows with the top up, looks a little bit like a "tee-pee". Both side roof rails are pointed up, right at the hinge point in the middle of the side rails. This causes my side glass not to contact several inches of the rubber window...

So, I have a leak in my air grabber vacuum canister. I seem to have 2 choices that I can find on the internet. Reproduction that looks nothing like the original for $95 or a used factory one for $145. I would "prefer" it too be factory BUT, I'm more interested in it not leaking vacuum. I...

So, my car has been WAY apart for several years and I'm putting it back together (1970 Plymouth Road Runner). My 3-speed wipers appear to be working BUT they don't return to the "park" position when I turn them off. I drove the car for years and the wipers worked (& "parked") just fine, so...

Are the quarter panel window rollers the same hardtop/convertible for a 1970 b-body? THANK YOU!

First, let me say that my car has been taken WAY apart several times by myself and the previous owner. I'm putting it back together and I'm confused. I'm trying to set the lower stop on the rear quarter windows & the factory service manual has me baffled. The up-stops for the windows are...

On a 70 Roadrunner convertible, it "looks" like there should be some window seals for the front of the side windows. It "looks" like the seals would go inside the back of the vent window frame (in the channel where the front of the side window slides up/down). My car has never had any seals...

On a 70 Roadrunner, are the two side scoops the same? If not, how do you tell the right one from the left one? THANKS!

I've got a 70 Roadrunner convt. & I need a patch for the passenger door jamb. I just need the lower corner & maybe part of the rocker panel outer skin. For the door jamb, AMD only shows a hardtop & a post/coupe version (no convertible) AND the two pieces are different. Does anyone know which...

OK, dumb thing #1, the guy who replaced my trunk floor threw away my spare tire hold-down bracket (many years ago). Dumb thing #2, I didn't notice. Are convertible & hard top trunk hold downs the same/different? Where do I get one? I have a threaded rod (3/8" by looking at it) & a smaller...

I believe in 1969, 440 six pack Road Runners got black steel wheels, chrome lug nuts and no hubcaps, but what about 1970 440 six pack Road Runners that did NOT come with rally wheels? (either type). If you ordered steel wheels, were they black or body color? Did you get poverty hubcaps? No...

Isn't this spare tire location wrong on a 70 Road Runner convertible? I thought they went over on the passenger side of the trunk on 68-70 convertibles and this is the hardtop location, correct? Am I dreaming?

Does anyone know where to get the correct O-rings for the power steering box low-pressure return line nipple? I don't want to guess about exact thickness and/or compatibility with power steering fluid. There are two of them and they go right behind this nipple (extension pointing at nipple in...

Here's the full story. I have manual steering car and installed power steering. 1. Swapped manual to p/s shaft in column 2. New pitman arm (if I remember correctly) 3. New coupler with new internals 4. Rebuilt parts-store p/s pump. Saginaw, round/metal reservoir 5. Return hose nipple piece I...

Well, when I bought my car it was totaled & a complete basket case that came with 13 boxes of misc. parts. I determined that I have the correct tail light covers (apparently cover the wires/bulbs from inside the trunk), but stupid me can't figure out which way they go on and/or how they attach...

Well, since I'm working on my steering box I decided to replace my dipstick/tube. I didn't know what to buy for sure, so I bought the #2078 below. This is a 440 with headers in a '70 Road Runner. Here's what my engine bay looks like with the headers and the old/bent/leaking aftermarket...

The factory service manual doesn't say how to replace the power steering gear box itself. It "looks" straight forward....drop center link, remove pitman arm, pull back column (or coupler), un-bolt & replace. HOWEVER, when I did this last time (converting manual to power steering) I think I...

My power steering box is leaking fluid like a river. I'm looking at the Firm Feel website and am wondering which one (level 1, 2 or 3) you'd guys recommend. http://www.firmfeel.com/b_body_mopar_power_steering_box_rebuild.html Power Steering Box All FFI Power Steering boxes are thoroughly...

So, I converted my manual steering car to power steering. I noticed that when I'm parallel parking (steering going lock to lock) I get a "belt chirp" & my power steering belt keeps getting loose. This weekend, I ran it up through 3 gears and the p/s belt jumped off completely. I replaced the...

70 Road Runner - My gas gage hasn't worked in many years, so when I worked on my tank I put in one of those $25 repops so I could go to 3/8" line. When the tank is full, the gage reads 1/2. When the gage reads "empty" I have about 4 gal. of fuel left. I "figured" it was the cheap sending...

Are the '69-'70 Dodge (2dr) doors the same as '69-'70 Plymouth (2dr) doors? I'm wondering if I can put a '69 Coronet door on my '70 Road Runner.