Search results for query: *

I'm piecing together a new motor & I have a set of Edelbrock aluminum heads with no heat crossover. I street drive this car and want the choke to work (fyi-my factory choke works fine with iron heads). The center six pack carbs don't have the right holes to install a manual choke (what I'd...

I'm confused. I'm trying to run a 3/8" flexible hose fuel line up to my six pack stock/steel upper fuel lines. Right now I've got a short piece of 3/8" fuel line and the fuel line fitting with the hose clamped on. I'd like to replace that with a 3/8" hose barb.....so where do I get a fitting...

OK, I've read about a half dozen posts on this and I'm stumped. 1970 Roadrunner with a factory fuel tank (99% sure it's original). The fuel tank has an aftermarket "dual outlet sump" on it, so fuel goes out those two outlets & the original fuel line at the sender is capped off, but the sender...

I was wondering about the effect of an open vs. divided carburetor spacer on a dual plane intake manifold. In my case, I have a dual plane intake manifold where the intake runners left/right are separated. I now have 1" open carburetor spacers, so the left/right side of intake is now "mixed...

Where do you suggest I buy a replacement throttle cable for a 1970 440 six pack Road Runner? Thank the good Lord they seem to be reproduced now! I saw Megaparts has one for $80 and Restoration Parts Source has one for $61 + $15 shipping, but he's drop shipping it from somewhere & is out of...

I've had some periodic vapor lock issued on my 440 six pack. I'm running a Holley electric blue pump. Will adding a vapor separator help me? THANKS