Search results for query: *

Anyone else have this issue, and how did you remedy it? Thinking I should make a slit for it on splash guard. Anyone run into this? Thanks!

So I'm going to replace the tires on my car once I get it going. The ones I bought are now 6 years old and I'm a little nervous about them. They were the 325/50-15s but they don't make that style anymore. I'm looking for something with decent traction for the strip, but won't hydroplane on the...

So I was just wondering from a standing start what distance does it take to reach max MPH in a HP B body? What HP requirement would it take to reach 200 mph. I'm sure every car is different but just a guess? HemiRunner got any thoughts?

So I've started researching driveshafts for my car. .78 OD with 28" tires with 3.73 gear. Shaft will be about 36" long from joint to joint (gearvendor OD) I've read the bigger the OD the higher the critical RPM I did the formula at 6Krpm with my set up so top est. speed would be about 175 with...

Looking to see what you guys are running for driveshaft loops. BTW I'm running full 3" exhaust.

So where I live the corrected altitude can be anywhere from 0 to 4000 ft depending on weather and time of year. So I was wondering if I tuned the car with straight gas for spring and good air, could I run 10, 15 or 20% ethanol blend to lean it up a touch as the DA rises? I have installed a wide...

I'm looking for advice on a RPM activated switch to shut off the AC at say 4000 rpm. Something simple & small. Thanks

First I'm looking for advice on street driven cars, not street legal. I've heard that the cal tracs work best with 5" of travel at the front end. I was talking with a Viking rep and he said he could get me a shock with the 5" but that I'd probably only have about 2" of compression for street...

Just saw Jegs has 15% of safety stuff. Helmets, suits, shoes, belts, ect

Looking for some skinny radial tires for the front. street/strip car 69 GTX. looking for black wall 28' tall. Any suggestions? Running M/T ET 325/50/15 on the rear.

Does anyone know of a search that does engine stuff? Got a list of stuff to buy and trying to do some shopping around. So far RPM & Tennessee speed shop have had some good prices but I had someone tell me about them, cause they didn't show up on the google search. Any help would be welcomed!!!

Does anyone know of a BB valvecover with removable top for setting rockers? Anyone own some, do you like them?

Anyone running a alum big block on the street? How has it been? Thinking of building one, strickly for weight savings.

Wondering if the trick flow heads are available yet? Has anyone heard of anyone getting a set?

I'm going for a retro/stock look and was wondering if max wedge exhaust manifolds would bolt onto a 69 B body ? Has anyone done flow # comparision on 69 HPs to max wedge to header comparision?

So what effect would moving my lobe seperation from 110 to 112-114 have other than smoothing out the idle? Is there a negative side to doing this? The cam I was looking at had 230-236 @ .050 with .540 lift. I like everything except the idle, was wanting a little more stealth. I was also going to...

Was looking for a 727 with a gear vendor. Came across Cope Racing Transmisions. The quote he gave me was reasonable. Wondering if anyone had any experiance with his trannys? Thanks

When using 1.5 rocker gear what is the max lift you can get without coil bind on say 906's. A friend asked me and I didn't know off the top off my head.