Search results for query: *

Can anyone tell me if there’s a difference between the Edelbrock Hemi Gen2 valve cover gaskets #7589 which cost around $150 and the Fel Pro gaskets VS50007C which cost around $30 a set? Thanks

Hi all, I was looking at the bolts that mount the 4 speed to the mounting pad on the A833 and the bottom bolt appears to be too long. It hits the transmission casting. I haven’t had this Bee long so I’m just going over things. Thanks in advance.

Can anyone tell me what kind of lifter this is? I was always under the impression that a solid lifter was solid but these lifters I removed from my 67 Hemi don’t act like hydraulic flat lifters. Meaning if you take a screwdriver you can’t compress the lifter. I know the 67 Hemis came from the...

Just a question for the experts, lets say you mill .015 off stock 440 heads should you run shorter pushrods if you are using the stock rocker setup? Just wondering.

I was just wondering if anyone has found anything in the water jacket of a motor. I had my 383 shortblock that I picked up last fall and had it on the engine stand upside down and was inspecting it. I looked at the cooling passage between cylinders#5 and #7 and saw something. It was an old...

I have a 383 shortblock that I wanted to remove the pipe plug to pull the fuel pump pushrod out and inspect/measure it. Well the plug is boogered up and my hex key won't work on it. Before I drill this plug out and possibly have to Heli-coil the threads are there any other opinions on how to...

A friend of mine has a 74 Cuda 318 with the original 3 speed manual tranny. Does anyone know if a pistol grip shifter will bolt in? Thanks!