Search results for query: *

What script date code spark plug wires would be used on May built big block 1965 Belvedere? It seems that a 3rd quarter code would be used for late 64 and early 65 and a 1st quarter code is used for late 65 early 66. Is this correct? Thanks /

I went with a different color so I don't need these. I have had these for a number of years, and they are still in plastic and have never been opened. These are from REM Automotive: 64/65 Bel/Sat package tray std (2 piece sewn) black 64/65 Bel/Sat HDTP sun visors Bison #100 black 64/65 Bel/Sat...

Anyone have a 1965 Satellite or 65 Belvedere II with a vinyl roof? If so, are the drip rail moldings the same on a car that doesn't have a vinyl roof? Thanks

So, does one bolt go from the front and the other two from the back side?

Have a 65 Belvedere. Doors are off with the upper hinges still attached. The cowl where they attach only has one hole that is threaded, the other two holes are not threaded. How then are they bolted on? Thanks

Anyone have measurements or pattern for placing "Commando V8" emblem on front fender of a 1965 Belvedere II? If your car uses that emblem, can you send me a photo with measurements from side trim and front of car for both sides for correct placement? Thanks

There were two emblems that could be used. Just "V8" emblem for a 273 or 318 engine. A "Commando V8" emblem for 361, 383, or 426. Between front wheel and door was emblem "Belvedere II"

I noticed that the car in the 62-65 section labeled Polara body work, was mounted on a rotisserie without any bracing. Can this be done? I'm planning to put my 65 Belvedere II 2 dr HT on a rotisserie to add subframe connectors, torque boxes, do some minor body work, and clean underside. Should I...

I noticed that the car was mounted on a rotisserie without any bracing. Can this be done? I'm planning to put my 65 Belvedere II 2 dr HT on a rotisserie to add subframe connectors, do some minor body work, and clean underside. Should I use some bracing to reduce flex or will it be ok without...

F2466112 = F production plant, 2466112 = 1965 B/C body with 361, 383, 413 engine (code ending in 113 426 wedge) 1499911= typical 10,000 day code

Looking for dash pad for 1965 Belvedere or Satellite. Thanks

The left side bracket is welded to the floor pan whereas the right side has a backing plate. You use the four indentions in the floor pan to drill the four holes. The backing plate is used on the inside of the car and the bracket mounts to it. Bart, private messege me so I can get your phone...

Looking for heat shield for the power steering hose on a 1965 Belvedere. Thanks

Thin black paint with some thinner, and put it in a syringe to inject paint inside lettering.

Thanks Early B. I talked to Joe and he does have the right side for a 65.

I want to add duel exhaust to my 65 Belvedere. The left side has a welded bracket under the floor pan that the hanger attaches to hold pipe and muffler. The right side doesn't have a bracket. On a 66, the welded bracket is on the right side and no bracket on the left. You can buy a bracket and a...

I want to install duel exhaust on my 1965 Belvedere II. Looking for the backing plate and bracket for the right side that holds the hanger for the tailpipe and muffler. It would have to come from a car that had duel exhaust. The left side bracket is different and is used for single exhaust. Thanks

Looking for NOS or excellent condition 1965 Belvedere dash knobs. Thanks

Anyone have measurements or pattern for placing "Commando V8" emblem on front fender of a 1965 Belvedere II? If your car uses that emblem, can you send me a photo with measurements from side trim and front of car for both sides for correct placement? Thanks

Sharon's Web did mine for my 65 Belvedere and did a fantastic job. Reasonable price and fast turnaround time.