Search results for query: *

:rofl::rofl: Yep... that's Portland to T.

I'll be following. I'm also working on a 5.9 (mild build) keeping stock heads/rockers Haven't decided on an oregon cam grind yet.

If you don't get an answer here, try posting on forabodiesonly.com. Lots of guys building magnum engines over there.

^^^ Good advice ^^^ I have a herd of them and everytime a new outsider gets introduced they don't like it but they'll get used to it after a week or two.

You could try disconnecting the accelerator pump rod. Possible the pump is binding and not allowing the throttle plates to close completely. Just don't drop the little clip!

Make sure you're buying a 727 for a car and not one from a motorhome, van, etc. with a short tail shaft.

The only hard part is finding the little pins that match the valleys in your ignition key. Take a door lock cylinder and pop off that little rectangular stainless steel cover. Carefully dump out the springs and pins. I believe there are 5 springs and 10 little pins. Insert your ignition key into...

https://www.forbbodiesonly.com/moparforum/threads/22in-to-26in-radiator.295506/

https://www.brewersperformance.com/

Thanks. PM'd GTX JOHN.

Looking for a summitracing discount code. PM me if you have one you'd like to part with. Thanks

There's cam regrinding of your original cam. These guys have good reputation but a horrible website. Lots of guys on forabodiesonly.com use and speak highly of them. Oregon Cam Grinding https://www.oregoncamshaft.com/index.html

There is also tinted glass and clear so he'll probably want to find matching glass.

The owner of arizonaparts is a member here under the name "marty mopar". I bought some door emblems from him for a 67 coronet 500 a few years back. They were really nice parts. Same email on his page below and on the contact page for arizonaparts.com...

Post a wanted ad in the WTB section. Other members might have what you need. https://www.forbbodiesonly.com/moparforum/forums/wanted-mopar-parts-and-cars-wtb.15/

This might be the part you're looking for. https://www.detroitmuscletechnologies.com/mopar-a-b-body-62-66-lower-steering-column-end-seal/

Those are some huge whitetails. Saw this 4x3 muley this morning in the front yard hot on the trail of a doe. He was across the creek in the field before i could get my phone out so the pic sucks. Pretty good buck for my area. His rack was a few inches past his ears. Easily 30-32" spread. Hope...

Push nuts. Like the one shown above. I don't know the dimensions but you might be able to find one here or possibly at your local hardware store. https://www.mcmaster.com/products/push-nuts/push-on-external-retaining-rings-6/

All these cars Not to hijack the thread but anyone else running 15x8 on the rear of a 66/67 b body with 255/60/15? I was under the impression 15x7 would be about max. This looks great.