Search results for query: *

Tips to improve headlights motor when you rebuilt it. Under the 2 brushes holder you have a thermal interrupter, the problem is after years the 2 rivets became loose and poor connection happens. Those rivets overheat and make problems. Rivets remove and new hardware installed.

Can you make a close up picture of the the connections under the fiber plate. I would like to see were wires are connected to the top fiber plate. Thanks

Yes, thermal interrupter inside...

I agree with you. But before I ship my motor to Todd or Topher I will make a visual check, I have a good working motor it will be good a good reference. I will connect the wiring the way it's supposed to be and see... Thanks everyone for the help

Thanks for this information. I try to find internal wiring for headlights motor but it looks like it's not in the schematic diagram. I think I will remove one of my headlight motor and see what it looks like inside.

Hi, I would like to know if someone can help me with the way to solder all the wiring inside the motor. My friend give me the disassemble motor, everything looks good inside and out side. Thanks

Hi, I would like to know if someone can help me with the way to solder all the wiring inside the motor. My friend give me the disassemble motor, everything looks good inside and out side. Thanks

This is my $10.00 line lock..4 new items by Jacques Poliquin

Recently I bought a Dodge Charger 1967 with a bad shape crossmember, and I would like to have an idea of the cost of the parts and labor for this repair. I know it will be very expensive. Thanks.

https://www.forbbodiesonly.com/moparforum/threads/gauge-bezel-restoration.65130/

Safety first..

My car with Mr. Six pack cam..

Or better mr 6 pack cam..

This is for low Deck block, but can be helpful... https://www.forbbodiesonly.com/moparforum/threads/solution-to-fit-edelbrock-performer-rpm-intake-and-still-using-stock-air-cleaner.113170/

Good advise, may be you have a 4 speed and best tires than mine... Mine is auto with street tires may be less stress.:rolleyes:

Thanks for the suggestion. . I use Mitymounts on the 451 for years, the engine horsepower is more than 500 and many time at the dragstrip...

This is my way to fit my stock air cleaner with the RPM but it's a 400 block , and the hood clearance is half of inch... https://www.forbbodiesonly.com/moparforum/threads/solution-to-fit-edelbrock-performer-rpm-intake-and-still-using-stock-air-cleaner.113170/