Search results for query: *

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel and Chrysler 3 and 4spd transmissions. All parts included as from the factory, including blockplate, all fasteners and reducing rings $900 plus shipping. PM me here if interested, thanks.

Standard bore 1970 383 block, missing main caps; it's been cooked, clean, shot blasted and magnetic particle inspected with no damage. Casting no. 2468130-8, dtd 10-24-69, no vin on the pad, S 383 and it has the letter stampings on the oil pan rails that designate piston sizing (DDDE/DDDE). If...

Supposedly new 5.57 8-3/4 gear set for 489 case, brand unknown but it is stamped USA with the 'heart' stamping. I got these and a set of 5.38s 2 years ago installed with spools, but decided they're probably a bit too low for my current project. I removed them tonight and will replace them with a...

These rascals are $1160 now, from Summit. If you have an A-body these fit without hammering the pinch weld or beating up the tunnel/firewall like the Lakewood units require and they're lighter too; these are excellent units.

PM sent

Reduced to $250 plus shipping

Why...wired to the starter relay (just as a 12v source?) and what type/brand of a switch are you using off the clutch pedal?

Don't discount Jack Forte at Turbo Action as he still makes a very good race converter...Phone: 904-741-4850

NOS alumiunm throttle bracket for 4 bbl carburetors, dual retrun springs w/adapter, never bolted on, $30 plus shipping from Savannah, Tn. PM me here if interested, thanks. As a side note, I forgot to mention the clamping bracket is probably for an after-market Locar-type cable, not the OEM type.

New in-the-box Edelbrock Performer intake manifold for the low deck 361-383-400 engines, still wrapped in plastic, $300 plus shipping from Savannah, Tn. PM me here if you have an interest, thanks!

It's looks like I'll be going back to work, SOOOO...I'm looking for a .0001" test indicator, Federal/Starrett/Mitutoyo/Brown-Sharpe/Interapid, no imports, nothing needing repair, must pass calibration/certification. 12-24" vernier ht gage, no damage/no rust/no imports, same American-made...

New, in-the-box RM-6073 QuickTime bellhousing for Chrysler big block, using 130T flywheel. All parts included as from the factory, $950 shipped within the continental 48 states. PM me here if interested, thanks.

Fletcher's been at it for a long time and has honed his driving skills quite well, and you're right...he IS tough to beat!

Might be a good idea to do a leakdown and cranking compression test for starts. Is that oil fouling and particles on the electrode and ground strap? Open the gaps to .045" and check your plug heat range. It's hard to tell from a picture like that as you need to be able to look down INTO the plug...

New parking brake cables for 62-65 B-body/62-66 A-body, $65 plus shipping from the Savannah Tn area. PM me here if interested and thanks for viewing...wb

Unknown 8" converter for '67-later 727, possibly A-1. New hub installed by Spec-Rite converters of Redding Calif; they stated it's a decent converter and should flash approx 4800-5000rpm behind a 440-type bracket engine. Comes with out-of-date SFI flaxplate and bolts, $500 plus shipping from the...

Very nice MP M-1 intake manifold with very little use, $300 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb

New in-the-box Edelbrock AVS2 800 cfm carburetor with new unopened strip/jetting kit, $380 plus shipping from the Savannah, Tn area. PM me here if interested and thanks for viewing...wb

'187' big block oil pan with 3/8" pick-up, very good condition, $150 plus shipping from the Savannah, Tn area. Pan is clean with good paint, ready to install. PM me here if interested, thanks for viewing...wb

Best to you John, and by-all-means, get back on track...literally.