Search results for query: *

Here is the point I am at with my 69 RR. Metalwork should be about done and will be getting it sand blasted in a month or so. I have always epoxy primed, base, and cleared the bottoms. And then sprayed Resto Rick's undercoating in the wheel wells. The guy painting the exterior stopped over...

For you guys that have added this piece to your cars, wondering your thoughts on if it is a worthwhile upgrade? I am going to be redoing my Road Runner this winter. Replacing my home made frame connectors with US Cartools as well as adding torque boxes.

The area of body color that shows between the tailpanel and tail lamps. Everytime I walk by the back of my car I feel as though this area looks odd and should have some black paint. Can't seem to find any mention of it in the searches I have done. What are you guys that own lighter colored...

Anybody have a source for these black plastic bushings as well as the black washer that goes on each side of the vent wing window glass? I believe they are also the same ones used on the pop out rear windows in coupe cars.

Trying to find a can of paint that will be close to matching the original on my 69 Super Bee. Herbs lists 2033 Argent Silver Grill Paint, wondering if anybody has used it? I know Totally Auto sells some also, but is about $10. more and this stuff from Herbs is high enough once shipping is applied.

So I am thinking of buying a buffing machine to polish all the stainless and chrome trim on my current project. Wondering what you guys are using? I see Eastwood sells a 1/2 hp machine with a stand for $173. https://www.eastwood.com/1-2hp-buff-motor-w-buff-stand.html and a kit with a couple of...

Any of you guys ever repair a pulled out stud on a scoop. It would be the style that could be optioned on a Super Bee and I believe is made of ABS plastic, or possibly fiberglass. What would be the best product to bond a metal stud back into it?

Like the title says. I have a couple sets of rallye mirrors that I want to clean up. Would like to blast and paint one pair, but can't figure out how to get the glass out without breaking it. New glass seems to be nonexistent.

I'm looking for any opinions for getting a watertight seal on a windshield install on my Charger. On previous cars, we have been able to reapply urethane in the bottom corners and taken care of leaks. My current Charger project is kicking our a$$ and getting myself and the glass guy very...

Just snapped in the new hood mounted blinkers on my 69 Charger that I bought from Year One. The car never had any so I don't have anything for reference. Is there supposed to be a gasket between these and the hood? It seems strange that they are not sealed off and any water can seep around...

We are getting the final blocking done on my 69 Charger project and will be needing to get the seam sealer put on soon. Aside from the obvious areas in the trunk and floor pans, where else should it be on these cars? Interior flanges on the door skins, the front lips of the quarter panels in...

On my 69 Charger I am starting the repair and repaint of the front grill. Somewhere along the line a previous owner took a can of black spray paint to the entire front side of the grill. I have sanded the easily accessible areas but have no good way to get in all the nooks and crannies. Does...

On my 69 Charger. Does anybody know the correct color black for the headlight/grill support and also the correct black for the dash frame? I'm thinking flat or satin, but not sure. Also do the 4 front inner fender splash shields get body color or black?

Any thoughts or opinions on powder coating vs. paint for a k-frame, upper and lower control arms, and steering linkage? Is it tougher than paint and how does it stand up to oil, brake fluid, antifreeze, power steering fluid? Would it be worth the added expense?

Awhile ago someone posted a spec sheet with all of the critcal measurements regaurding the main structure of a 69 B body. Problem is I can't remember who or where. I'm thinking Matt, Will, or Donny but the page is eluding me. I am about ready to start removing some major parts on a 69 Charger...

Does anybody recognize these splash shields or if they are even from a Mopar? They came with a bunch of things I bought for a Charger, but I am pretty certain I haven't seen them on my Chargers or Road Runners.

For the guys using Rust Bullet, are you going with the standard or the automotive blend which apparently is thinner than the original.

Does anybody have a set for sale, or know where some can be purchased? They don't seem to be repo'd yet.

Question for you guys who have replaced rear frame rails. Which route would look the most like factory and fit the best? Buying AMD full rails and cutting off what I need, or the 48" long versions from Autobody Specialties or similar brand.

Hi guys, I am looking for a center section of a trunk pan for a 69 RR. Just between the frame rails. Does anybody know if this is made, or will I end up buying a full pan? Jeff@521 has the best price on AMD full pans, but they are all truck freight which adds alot to the cost. Sherman sells...