Search results for query: *

So I am researching leaf springs for my 71 Charger and have looked at pretty much most of the brands out there. I am wondering who is using what or perhaps what recommendations you might have. I want to lower the rear 1" and I want the car to handle. I have considered going to a triangulated 4...

Let me start by saying if you don't like these systems and don't understand why anyone would do it, then please don't post; this thread is about how/what to use not whether you should not not. I am going to post this on FABO as well. I have been researching this issue for some time and I have...

I am working on a 68 Ply Wagon for a friend and he brought me a E body booster he wants to use. It looks like it "might" clear but will be tight against the left inner fender/apron. Looking to see if someone has tried this. BTW I have already got it cleaned up, replaced the check valve and painted.

I need a sanity check here because I don't do these all that often; the story is that I am working on a 69 Belvedere wagon and as a part of my overall effort I had to remove the axles and swap out the 3rd member. I ended up putting new studs in both axles and new seals into the rearend housing...

I am working on a 69 Plymouth Wagon and putting 4 wheel discs on it, I have the rear done and am working on the front, we have calipers from a 73 Cuda and the correct (new) spindles, I am also using a 7/8" MC. The owner of the car provided a used booster from a 73 Cuda but it is bad, I have...

I am looking for information on what UCAs interchange between B/E body from 70-74; in other words, would the UCAs from say a 73 E body fit a 70 B body? I am not looking to do this exactly, rather I am looking at some UCAs that show all these as being interchangeable and I was just wondering if...

Let me begin by saying I understand that T bars are good, they can handle, etc. however I building a very modified 70 RR (with tilt front end) and I am considering going CO in the front really "just because". I already have down bars in the front which someone else did some time ago, cut out all...