• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. hunt2elk

    Flow Kooler 1679 water pump

    Have any of you guys swapped a standard Mopar water pump with one of these FK pumps with no other changes? Reason I ask is on my 493" stroker, Glen Ray 22" radiator with shroud, 216 clutch fan, 180* Stant Super Stat. At 80* ambient or cooler it runs 190* all the time. However, with this hot...
  2. hunt2elk

    Your thoughts on water pump lube/rust inhibitor?

    In the latest issue of MA, Ehrenberg makes a statement saying that anti-freeze never wears out, but what does is the additive package (anti-rust, water pump seal lube). So every 2-3 years just add a $2 bottle of the stuff to your coolant and you are good to go. I will admit that replacing...
  3. hunt2elk

    Anybody know a decent contact person at US Radiator?

    So I am thinking about buying a new radiator for my 69 Road Runner. Did a little research and kind of like the stuff that US Radiator makes. I called them today and was so put off by the man who answered the phone, that I hung up on him. I just had a couple of questions regarding their...
  4. hunt2elk

    Solid vs. clutch fan horsepower difference?

    Wondering if anybody has done any testing or read any articles about the horsepower gain by going to a clutch type fan over a solid one. This is for my 69 RR. The car is a 383 w/22" radiator and a 223 fan with a 2" spacer. I had the radiator recored several years ago with a 3 core...
  5. hunt2elk

    Lower radiator hose spring - FYI

    I have just started the teardown of my 69 Road Runner for an engine swap, and realized I didn't have a spring in the lower hose. For some reason these are hard to find. I ran across one that fits perfect although it is made for a small block Ford - I just threw away the sticker and nobody will...
  6. hunt2elk

    Fan blade opinion/options for a 440?

    I'm to the point on my 69 Charger R/T non A/C car to figure out what to use for a fan blade. My options are a fixed blade with a 1.24" spacer which has plenty of clearance and is centered in the shroud. This setup fits very nice. Or, what I think would have come on the car. I have an...
  7. hunt2elk

    heater hose routing BB & Hemi's

    In the latest copy of MCG there was a short article on common restoration errors. They say the heater hoses should cross each other between the fender bracket and water pump in order to be installed correctly, so the output of the pump goes to the input of the heater core. Is this neccessary...
Back
Top