Search results for query: *

So my '63 is back together, and roadtesting in progress. My speedo is not indicating my speed, but the odometer is recording the mileage ? Funny thing is, my friends '65 is doing the same thing. Do any Pro Mid 60's veterans, have some input, and a solution ? Thanks for any, and All input !!!

After finishing my '63 MW project, I'm looking ahead to my next money pit, a '65 Coronet Sedan. My '63 is bare bones, No Power steering, or brakes, just that big ol' wheel to crank on, to get it parked, in those tight spots. Thinking of adding the P/S to the Hemi for the '65. Has anyone...

I've finally road tested my '63, and it's going to be quite a car. We completely replaced the drivetrain, and it now had a '65 P/B slip yoke in it. The speedo was not working on the maiden voyage, both ends secure. Will a '63 cable, work in a '65 transmission ? Not gonna stop me from driving...

I'm close to getting the '63 operational. I'm ready to place the reworked steering wheel, but need to assemble the items, and switch h for the horn operation. Into it apart 7 years ago, and missed taking pics of it, before dis-assembly. I'm not finding any specifics in the FSM on this. Does...

I'm close to needing to mount my tach in my '63 330, and looking for a good location, without drilling into the dash, or cluster bezel. Where have you all placed them, and pics would be great. I'm not using a distributor driven tach, so no cable on it, Thanks for any, and all input...

I installed the windlace in my '63 Sedan today. It went in well, but like so many, can not get doors to close. I closed them as much as possible, in hopes they will start to form into the correct positions. Any suggestions, or tips to get the proper fit now ? Thanks...

I'm trying to get my 330 interior done, and having trouble locating the inner rear window screw locations. I don't want to mess up the headliner by poking around possible spots. If anyone could post, or send a few pics of theirs in place, and possibly pull 1 screw out, for size ID, it would be a...

I wrapped my '63 up in early Dec. Can't wait to get back on it, when the weather breaks, and we get some Spring heading in. How about some pics, and plans, or work your doing on these Gems ? I need some boost to get me there, Thanks !!!

I'm reassembling my 63 330 Sedan. Does anyone have any reference as to IF clips are needed to attach the trim, or just screws into roof railing ? Any pics would be a great help, especially an empty roof without the headliner, and a finished interior, as to where the trim strip lays ? I believe...

Finishing touches approaching on my '63 330 MW restoration. Does anyone know, or have, or access to a Survivor ? Was the radiator support blacked out, behind the grill, on the Factory cars ? I thought it would look good for some contrast, but the paint also looks nice. Any, and All input...

My '63 is nearing completion, and I'd like to add a transmission cooler to it. Since there were no Factory options I'm aware of, what have any of you used, that work, fit, and look decent ? Mine is not built for racing, but may see some occasional strip time, 440 stroker, 727, deep pan, stock...

We're running the cables on my '63 330, MW build. Is the PB shift cable longer than a /6 for a MW ? Next up, is the Speedometer cable longer than a stock /6 ? The originals seem to be stretched, and too close to the exhaust, without restraining them some. Any, and All input appreciated, Thanks

I'm looking for the tires on my '63 330 Build. Does anyone know what brand tires were used on them, from the Factory ? Were Max Wedge Cars any different than stock options ? Looking at Coker, they offer Firestone, or B.F. Goodrich. Does anyone have any other sources for Vintage Bias Tires ...

Fishing the trunk mount Positive cable to the front. Does anyone have a pic of the factory location, size, and grommet, where these came through the firewall ? Any & all Info appreciated, Thanks...

I'm looking for specs, diagram, info for a harness on my '63. Can't get any venders to fill an order, so may need to make one up. Any pics of an actual Factory set-up would also help. I did post an ad in the Perf Parts WTB section, Thanks

I'm still trying to work the rear suspension on my '63 build, and was wondering if anyone has the part#'s of the rear springs that were installed in the Factory SS cars ? I know this is a long shot, but does anyone have any pics of the rear axle mounts, front and rear shackle, or even a longer...

Well the time has come to start the assembly, and wouldn't you know, the rear leafs won't reach the rear shackle mount with the arc in them, MP Part #P3690456 & #P3690457. I know these are for '64-'65 B-Body, but through all the reference, and info gotten from many sources, they should fit using...

I'm gonna post this, as my build is hitting 5yrs in the making, this year. I doubt if I will ever go back to a step by step thread on it, so I'm pretty excited about this phase. It should be on the dyno this Month...

I sent my Pot Metal Trim pieces for my '63 Dodge 330 Sedan to Advanced Chrome Plating, in Tennessee, and they ruined them. They are the Hood & Trunk Stars, along with the Dodge emblems for the Trunk, and 2 Front Fenders. I have a detailed post, with pics & part #'s, in the WTB Section. Just...

I'm hoping someone has put one of the new Max Wedge Oil Pans on their engine, as I'm looking for an Oil Pick Up Tube that will work with this. First try was a P4529567, and it is too long for the pan. Using a Mopar Performance RB block. Any, and all info appreciated, Thanks...