Search results for query: *

My 69 RR had a Grant wheel on it when I bought it and I'm now looking to convert it back to stock. I have bought a wheel, horn ring/pad and the nifty little RR emblem to pop into the horn ring... I was looking in the FSM just now and it looks like I might be missing a part or 2... it looks...

I have an aftermarket six pack hood and the stock hood springs are starting to crack and bow the hood from the high tension. Does anyone know if aftermarket, low tension springs are made for a 69 B body? If not, would the 70 challenger AAR springs fit?

I need a new rear seat frame for my 69 RR and there is a 70 Superbee seat avail... can someone tell me if it will fit?

I'm looking at extending my exhaust out to the bumper with stock style tips with the L brackets... Where do the L brackets hook on? I saw these onPGs website. Do I need these to use the stock tips? http://www.pgclassic.com/product_info.php?products_id=642

Does anyone have a pic of how the rear brake line routes where it transitions from the engine bay to the inside of the rocker panels? I'm replacing mine and the routing of the current line doesn't look right...

Ok, so I own a torch, but have never used it before. I've been trying to get the steering column coupler to seperate from the gear box spline with some pb blaster and a 3 ft pry bar and it won't budge. My question is... Can I heat up the steering coupler with the torch to break the bond? And if...

Ok, so I'm installing a new Hellwig sway bar on my 69 RR. I've got the brackets on the frame, bushings on and Ubrackets that bolt it to the frame in place... Here's the problem.... I can't seem to get the support bracket that runs from the front of the crossmember to the radiator support...

I'm re installing my lower control arms and am wondering if I should grease the pivot shaft... Doesnt mention it in the service manual.

I was going to buy new brake lines at some point for my 69 RR but all of the sites are asking if the right side line is over or under frame... maybe a very stupid question, but, how do I know? My right side front line runs out of the master cylinder...across the firewall, over the frame...

I am going to be doing the rear suspension this weekend and the front next week. When replacing rear springs, I was thinking 2 stands (3 Ton 4 leg is what I have) under the rear framerail close to where the spring hangers are mounted and some 8x8 blocks just in case. I'll use my floor jack...

I have a lead on a set of knuckles, calipers, brackets and rotors. Wondering what the value is roughly considering the seem to be fairly rare.

Need help...what is correct rear seat cover for front buckets? looking to buy from Year One tonight (30% off). 69 RR...originally bench, now front buckets. year One lists...Deluxe, Standard, Coupe and Custom Coupe? What would be the standard to go with Front buckets? Thanks

I am just finishing up on my headliner...glad I did it once...think ill pay for someone to do it next time. My car had no interior when I bought it, so I'm having a little bit of a hard time figuring out where the interior side trim orients... The used set I bought has a singular screw hole...

I needed a side view mirror for the RR and got a ridiculously good deal on a remote mirror (original was manual) does anyone have dimensions I can use to locate the hole for the bezel? Thanks

Does anyone have a closeup pic of the RR door decal and emblem? I'm trying to place the decal in don't have the exact location dimensions in relation to the "Road Runner" emblem.

Can anyone tell me what the proper size and Threads should be for 69 RR seat belt-to-body hardware? It looks like a 7/16 bolt but I have tried a -14 and -20 and neither fit... is it a finer thread?

Installing a new carpet kit in my 69 RR and I'm bring to remove the hurst shifter from the tranny so I can lay the carpet before cutting a hole for the shifter. The 69 repair manual says to use a .010 feeler gauge to release the spring clips....I've tried this multiple times to no...

Liscence plate lamp bracket http://www.ebay.com/itm/1971-PLYMOUTH-ROADRUNNER-REAR-LICENSE-PLATE-LAMP-ORIGINAL-1972-MOPAR-/370622246211?pt=Vintage_Car_Truck_Parts_Accessories&hash=item564acead43&vxp=mtr&_uhb=1#ht_2842wt_689

Another hardware question for you guys.. What type of hardware is used to hold in the Back Up lamps in the bumper? The holes in the lamp bezels are tiny, like #8 oval screws, but the slots in the bumper are HUGE...I must be missing something, is there a retainer bracket?

Can someone tell me what type of hardware is used to mount the Radio Bezel plate?