Search results for query: *

Hi guys - I thought I had a dripping oil pan because the bolts were a little loose back when - I tightened them after I put the engine in the car. A while later I noticed a slight drip on the garage floor. Today I got it to a shop where I could get it up on a lift - it seems as though I have a...

Dirty Minds ..... I know what you were thinking... My problem is Hooker headers wrap very closely around my mini starter. As you all know heat is the enemy in this case. I don't have much room to play with so I was wondering if others of you that have this problem have a preference for a...

At the risk of sounding totally naive I'm wondering if anyone knows how you can tell if you have a bad fuel pump. My carbs aren't getting fuel and I pulled the line from the tank off the pump and fuel - came out - I wouldn't say it poured out but there was certainly enough to start the car. So...

I have a brand new deep sump 7 qt oil pan on a new stroker motor. Probably has maybe 100 miles on it. Wasn't leaking until just recently. Checked the bolts on the pan and they were all loose. Advice from a friend said not uncommon for the bolts to loosen after putting some miles on a new motor...

I have a 68 GTX where I'm having trouble fitting my new L60s into the wheel wells. I need to raise the car about an inch to give me clearance for the tires. I posted a thread on air shocks as a solution and got a lot of good input. since that thread I've heard of a solution called overload...

Can anyone tell me what the tubes in each of the four corners of the six pack air cleaner assembly are for? They're on the base of the assembly and appear to be drains for water or something. I have a new restoration going and the car is in a different state than I'm in or I would attach pics...

I'll spare you all the details of why I need a 69 Wiper Motor for a 68 vehicle. There was apparently 2 different wiper motors for the 69 RoadRunner. One for the 4 barrel set up and one for the six pack set up. The one for the six pack set up was off set in someway to provide clearance for the...

Does anyone know where you can get the soft rubber gasket that goes around the six pack air cleaner base assembly for a 69 RR or Superbee. There must be a company that reproduces those or a member that has one available. I don't want the whole air cleaner. I have everything but the gasket. Not...

The "Tired Warrior" is almost refreshed. Still got work to do and paint is just around the corner. What I'm looking for is where all you lift off fiber glass hood guys get those stands that set your hoods up even at about 2 feet above the engine compartment. I only see them at shows. You know...

You know how back in the day so many of the interior parts were made out of plastic? I'm talking about the ones that were made to look metal in particular. Is there a way to refinish those to the original metal or silver look. I have some perfectly good parts with the finish worn off that I hope...