SOLD 15" x 8" Steel Wheels (2)

[Banzaiii67]

Big Bolt Pattern; 5" x 4.5", Backspacing is 4.5".

Fresh satin black powder coating: previous paint was stripped, then blasted and finished coated (cost me $175). They were mounted on 275/60-15 for a couple of weeks, however the combo did not fit under the wheel wells of my '67 Plymouth. Tires have been sold.

$200 + Shipping from 97267. I can also throw in a pair of Plain dog dish caps that fit these if you want.

 

[potze426]

Will these work on a 63 Plymouth Fury?

 

[Rolling Thunder]

Yes they will.

Will these work on a 63 Plymouth Fury?

 

[potze426]

How much to 48430. Thanks. I know the back spacing will work, but I am afraid the side of the tire will rub against the lip of the wheel when the car bounces down or going around sharp curves.

 

[Banzaiii67]

How much to 48430. Thanks. I know the back spacing will work, but I am afraid the side of the tire will rub against the lip of the wheel when the car bounces down or going around sharp curves.

I'll check for you and PM you cost

 

[Banzaiii67]

It looks like $40-50 per wheel for shipping, depending on where you live.

 

[Banzaiii67]

<delete post>