• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

68 coronet headliner 2d hard top help!!!!!!!!!!!!!!!!!!!

Jasoncoronet

Well-Known Member
Local time
8:20 AM
Joined
Mar 31, 2011
Messages
233
Reaction score
31
Location
California
Hello everyone I am going to be installing my headliner and I am not sure of the clips that I need to use. Also how many does it take. I know there are two types of clips the u shaped ones and then the larger u shaped clips that also holds on the trim that runs down the windows. Does anybody have a picture or be willing to sell me the trim clips that hold on the long pieces of trim. I need to know how may should be there also.

1968 coronet hard top

Thanks,

Jason
 
(1st Pic..........Clips to hold the trim. Exact factory number them? I installed 8 on each side on my RR. About that when I took it apart initially.
(2nd Pic.........Clips that secure headliner to roof pinch lip. Exact number of them? Probably at least a dozen each side on my bird.

t1-4.jpg
t2-3.jpg

R/T Specialties, Megaparts, Ebay, YearOne and a lot of other places sell these..

Good Luck
 
(1st Pic..........Clips to hold the trim. Exact factory number them? I installed 8 on each side on my RR. About that when I took it apart initially.
(2nd Pic.........Clips that secure headliner to roof pinch lip. Exact number of them? Probably at least a dozen each side on my bird.

View attachment 87525
View attachment 87526

R/T Specialties, Megaparts, Ebay, YearOne and a lot of other places sell these..

Good Luck
Yep on the big clips and i just used the 3 per side like the factory did with the small ones,but it is also glued from the A pillar all the way to the C pillar as it wasnt from the factory
 
Hey thanks so much that answered my question perfectly.

Thanks again buddy

Jason
 
Auto Transport Service
Back
Top