What's it Worth 69 Roadrunner - project car

[eldubb440]

But KD had a solid car to start with, so welding his front clip to solid metal was no big deal. This one will no doubt have rust, rust, and more rust.

I completely agree, odds are the car is a bucket; but it actually doesn't look too bad in the pics...... we obviously need to see more; perhaps there is a reason that particular rail rotted like that. The middle of the rocker is toast also......

these aren't common rot spots, maybe mouse urine or similar

oh, and I was replying to Cranky's hypothetical...........

If the rust is contained to the area the pic shows, about how many hours would it take you to fix it?

 

[sam dupont]

It took a hit and was repaired down low on the right side, fender, rocker, and bottom of the door. Is the door rusty? you should take photos of every square inch. Up and inside of the sail panels, the floors and trunk floor from underneath, everywhere. People here have had many Road Runners apart and they could tell you exactly what you have. I would rather have the Road Runner unless the C2 is a blown straight axle gasser with big tires on the back.

 

[69_A12_6BBL]

I was going to suggest a $9500 asking price. People expect more car when they are paying 5 figures for it.

Yeah. Really no Price Guide per se, As the newest thoughts say "Worth what Someone is willing to Pay", Id list it at $10K O.B.O. someone WILL throw $8700-$9,500 at ya. BTW? Automatics ARE faster. Especially once you get that 1st Shoulder surgery.... Some will get it- Not a bad car!

 

[Cranky]

Yeah. Really no Price Guide per se, As the newest thoughts say "Worth what Someone is willing to Pay", Id list it at $10K O.B.O. someone WILL throw $8700-$9,500 at ya. BTW? Automatics ARE faster. Especially once you get that 1st Shoulder surgery.... Some will get it- Not a bad car!

Oh here we go again.....only ones that can't power shift are slow with stick

 

[RemCharger]

Oh here we go again.....only ones that can't power shift are slow with stick

The Ronnie Sox Theory

 

[barbee6043]

Can you do the work and do work that will make the car bring the $$$ when done? Do you have the time, not measured in years?

I am no help, I love the RR but after a decent project got up to $4-5000, I gave them up!!!

 

[dadsbee]

If you can even get it still from AMD, you'll be into $20,000+ in frame rails, hanger brackets, inner/outer wheel wells, rockers and floor plans in a HURRY. Labour, if you can't do it yourself, 400 hours minimum at the hourly rate.... and that's BEFORE body work and paint.