WTB Bench seat for 1969 Coronet 4 door.

[Bart K]

I would take a good core or something less that I can rob parts from. You would have to be willing to ship or be somewhere within a couple of hundred miles. I am near Tucson, AZ.

 

[704spdbzzz]

I would take a good core or something less that I can rob parts from. You would have to be willing to ship or be somewhere within a couple of hundred miles. I am near Tucson, AZ.

I'm up in Canada but I may separate bench for specific parts depending on what you need....

 

[Bart K]

I'm up in Canada but I may separate bench for specific parts depending on what you need....

What I need are the springs. I do not have the seat apart at the moment, but my upholstery guy told me he had to rob springs from the middle of the seat for the drivers side. It looks to me like there are coil springs and wavy springs....I would like all the bottom seat springs so my guy can rebuild as needed.

 

[704spdbzzz]

You may ad well just buy the seat bottom all intact and save yourself the cost and hassle of rebuild. My bench is from a 41000 mile car in excellent condition. ....it is 1970, not 1969 but don't believe this matters.....not 100 % sure. ....

 

[Bart K]

You may ad well just buy the seat bottom all intact and save yourself the cost and hassle of rebuild. My bench is from a 41000 mile car in excellent condition. ....it is 1970, not 1969 but don't believe this matters.....not 100 % sure. ....

Sending you a PM 704spd. Can anyone reading this thread comment if a bench seat bottom out of 70 Coronet would be the same as the 69 Coronet?

 

[1970 Roadrunner]

Think the 70 will be the same as 69. I have a nice set from a 69 Coronet 400 4 dr. still in the
car. Shipping could get high for the fronts and rears. I'm up for it if you are. I'm in SW Mo.
$150 for the rears and $150 for the fronts, all plus the ride.

 

[texas69bee]

I believe the seat bottoms for 68-70 are all the same. If you are looking for springs, those can be found on eBay under coil seat springs an z springs. I agree with what other are posting. Would be cheaper just to find a good one done already (but the cost of shipping blows). 1970 Roadrunner has a darn good price for those seats. Probably going to be another $150 to ship per set.

 

[Bart K]

Thanks for the replies guys! I am already working with a couple of other members, so let me see how those pan out and I will go from there. I agree that 70 Roadrunner has a great deal on his seats, but to be fair, I will work with who contacted me first.

 

[Bart K]

Just wanted to let you all know that the first person to reply to this thread and I have reached a deal. Thanks to the others that responded. Hopefully others will see this thread and take you up on what you have available. Thanks again all!!!