• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

ramcharger ductwork id

crank

Well-Known Member
Local time
4:46 PM
Joined
Aug 15, 2015
Messages
1,060
Reaction score
97
Location
ga.
anyone tell me what year these are?there's an old ramcharger decal on the ring.i'm not really that familiar with these.any info is appreciated,thanks

DSC06240.JPG DSC06241.JPG DSC06242.JPG DSC06243.JPG DSC06238.JPG DSC06239.JPG
 
69 was black, 70 was the same but orange.
 
thank you.so these would be for 69 dodge?
 
Really nice duct work is very difficult to find in good condition. If the unit is not all broke up and you are needing the 70 style in orange, I would sell off the good used one and put the money towards the 70 orange unit. I have yet to be able to find anyone that can duplicate the original appearance of the factory units. Also, check the engine side of the duct work on the driver side to see if it has the provision for the Hemi application. That will be a rectangle opening to clear the brake master cylinder.
 
i appreciate all the info.i'm not going to use them though.i want to sell them but wanted to know what the were,thanks
 
Auto Transport Service
Back
Top