Wire Harness choices

[snakeoil24]

I am the point of either building my own harness or buying. Since I have a 67 coronet rt Im updating the charging too solid state regulator, all new electrical Auto meter gauges entire new insert for gauges. Electric fuel pump, msd 7 al gold box, updated sanden compressor a/c cause i hate hot cars at my age. Trunk mounted duel battery and i am looking for input..

 

[HEMI-ITIS]

How is the rest of the wires? If your gunna update,do it ALL and not a little of this system and a little of that.There are several providers of complete kits down to DIY kits.Just do it right and be DONE!

 

[snakeoil24]

I am building entire harness front to back. I'm ok with building entire custom. If an off the shelf kit is better i'm all ears..

 

[HEMI-ITIS]

They are generic kits that you determine what relay turns what on.The kit just makes it simpler supplying the majority of connectors,relays,switches colored wire.

 

[aeon280]

I am currently installing a Ron Francis 7x24 kit in my 67 Coronet. Its going quite well but if I had it to do over again I would have gone with the Ron Francis express kit simply because you pull the wires to the fuse box making for a cleaner install and you only install the circuits you need. If you opt to go that route call them and they will build it to suit your situation. I bought mine via a third party so there are some connectors I do not need since I have an MSD box and not a Mopar ignition system. The overall quality is great and unlike painless they dont make you pay a premium for being a Mopar guy. The painless kits are way overpriced. They sell you a $300 chevy kit with some different connectors and charge you $650.

 

[HEMI-ITIS]

Does the kit go from the front lights to the tail lights?? I need to do under the dash and would like to make the directionals & tail lights in LED.

 

[Car Nut]

American Autowire

 

[aeon280]

Does the kit go from the front lights to the tail lights?? I need to do under the dash and would like to make the directionals & tail lights in LED.

Yes its a complete kit from headlights to tail lights. I am still in process of wiring the lights but the directions state to use a LED specific flasher if you go with LED,s. Once this cold snap moves out I will get back at it. I should be done in the next 2 weeks.

 

[ckessel]

Ron Francis will upgrade the harness if you are installing the battery in the trunk and/or using a higher amp alternator. No charge! Call them direct.