nutz4spd's latest activity
-
Although it took me longer than planned, she is back together looking and sounding better. Time to catch up on some cruise ins and car... -
-
nutz4spd replied to the thread LIFTER assembly question.That's the same thing I did. Did replacing the lifters take care of the tapping noise?
-
nutz4spd replied to the thread Lifter differences.The ones I bought didn't have a chamfer on the base. They measured either .900 or .905.. . I can't remember which.
-
nutz4spd replied to the thread Oh hell....I replaced all of the lifters today with oem style ones. Engine is much quiter and the knocking has gone. However, during the break in...
-
nutz4spd replied to the thread Lifter differences.Actually that's an older picture from last year. The lid is on tight right now. I'll have to pick up a dial indicator anyways.
-
-
nutz4spd replied to the thread Lifter differences.For reference, the old lifter is on the left. The HT-2011 is on the right. Seats are different and accommodate the newer push rods. Mine...
-
-
nutz4spd replied to the thread Lifter differences.So I swapped in two of the new lifters on #8 cylinder and the knocking went away. So far. It's not idling smoothly though and when I was...
-
nutz4spd replied to the thread Oh hell....I noticed the noise was much more prominent on the back of the intake valley pan. The rocker arms sounded more noisy on the left rear...
-
nutz4spd replied to the thread LIFTER assembly question.How did you make out? Just curious since I'm having a similar issue.
-
nutz4spd replied to the thread Lifter differences.Since it seems more correct I'm thinking I should just replace all 16 instead of the two that are making noise.
-
nutz4spd replied to the thread Lifter differences.I ordered a set of new lifters for the early 413 motor. First thing I did was measure it and it's .044" shorter than the ones currently...
-
-
To shroud... or, not to shroud. That is the question. 'Tis nobler to be with shroud than without.
-
nutz4spd replied to the thread Lifter differences.I can see that. I compared both and the sb ones are the same diameter but slightly shorter.
-
nutz4spd replied to the thread Oh hell....The hole you're talking about,I'm assuming, is the intake port on the head? I had stuffed paper towels in each intake and exhaust port...
