R413's latest activity
-
RR413 replied to the thread 67 Coronet 500 lower body side trim.Trim was all removed, it came standard on a Coronet 500. They are sharp looking rides when done up right. Hard to find pieces for for...
-
-
RHello, I need to sell my driver 1966 Coronet 440 model that came equipped with a 383-4 barrel/4-speed/3.23 SG in QQ1 dark metallic red...
-
RGo 742.
-
RR413 replied to the thread 741 vs 742.Now you hit it on the head. 67 GTX #2 all day long. Open or sure grip. Performance cars had #2. Last year for #2 is 1968. Small...
-
RR413 replied to the thread Engine puts off a lot of heat.The engine burning the fuel is 1/3 of each of these: Horsepower Coolant heat Exhaust heat So the more horsepower it has the more heat...
-
RR413 replied to the thread 50 Shades of…….RED?.Yes it is, and on the body stamps there are 3 characters in front of the 6 digit SO number
-
RI believe this is what you meant? S.O. (not VIN) is on fender tag in '68
-
RR413 replied to the thread 70 Sway bar strap???.All I can say is they are to be straight, just like your top one. Your bottom one is somehow bent, each side is a different length...
-
RR413 replied to the thread 70 Sway bar strap???.They were both the same at one time! Don't use the damaged one
-
RR413 replied to the thread 50 Shades of…….RED?.The 9 character number stamped in the body has: Plant Year Body type Then the 6 digit so number Not the six digit number on the fender tag
-
RR413 replied to the thread Wheel Wobble.Great advice swapping side to side. Drum and wheel need to sit flat on the axle hub. The center register on the axle needs to be...
-
RR413 replied to the thread 50 Shades of…….RED?.Were 68 super bees introduced later in the year, not at the start? 1968 first digit of the SO number will tell you what plant car was...
-
RR413 replied to the thread Smoke out of the right side tail pipe.White smoke when? Cold? hot? All the time? If the plugs all look good then it's not coolant in a cylinder. How old is the fuel? What...
-
RR413 replied to the thread 1967 Dodge Charger Seat Belts.Front seat outside position, the belt has a winder that retracts it into that holder.
-
RR413 replied to the thread 66 TO 67 BELVEDERE.I bet you have to drill new holes to mount the lamp. You will need to cut the square bigger in the quarter for the lamp to go in...
