Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
When converting from a Single Master Cylinder to a duel Master Cylinder, Do I use the old push rod and Boot off of my old Single MC.
My Duel MC did not come with a Plunger.
1966 Belvedere I Drum manual Brakes.
Thanks for every ones input including the mainifold its all well taken.
Looks like I need to use the 67 Block and right front brake line.
I think they also sent me the wrong Duel MC I have no plunger rod and I dont have a booster.
Di I take the Rod off of my original single MC ?
Thanks this is what Im looking for the other issue is my MC does not have a plunger rod. Do I use the one off the Single MC
I have the exact duel MC that is pictured.
Thanks for all your comments even the manifold one well taken.
Looks like I need to get a 67 block and front line. As you see from the picture the Block is for a duel MC set up.
I just cant get a firewall right side line to match to it. The duel master cylinder they sent me also does not have...
Heres what I have so far The white are towels in the holes The front line that runs along the Firewall goes in the side hole but my lines dont have that configuration.
I am restoring a 1966 Belvedere I and have done most of the brake work but have come to a hault in the front.
I am converting to duel MC and purchased a Distribution Block to do this Conversion.
My problem is after 3 front lines that go from the rite wheel to the block I cant get any to fit...