• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. T

    Can I time/tune an engine by ear? Can’t seem to see any lines on the harmonic balancer when using my timing gun on both the top or underneath the car.

    Hey all so I’m having a heck of time trying to tune this built 360 that’s new to me. Every other vehicle I’ve timed with this timing gun had the original motor in the car and was super simple. I’d point my innova 3568 timing gun at the harmonic balancer, see the line and then adjust the...
  3. T

    Noticing some smoke coming from valve cover breather on 67 Satellite with a 360 engine. Am I missing something obvious?

    So the car is new to me and the supposedly the engine was rebuilt recently with less than a few hundred miles on it. After driving it and popping the hood I notice that there is smoke coming from both breathers on both valve covers with a little bit of oil getting into the valve covers too. I...
  4. T

    Properly timing my 1967 Satellite with a rebuilt 360. Any tips on what initial and all in timing should be?

    So from what I read on previous posts most small blocks run well around 12-14 initial 34-36 all in. I haven’t checked the timing yet but it’s running a little rough. Idling at 1100rpm, stalling out when put in reverse and stalling at stop lights. So there might be some carb tuning that needs to...
  5. T

    72 Satellite, 318, Rear main seal replacement & small leak from rear diff. Trying to figure out if I should do it myself or pay someone

    So I’ve had a slow leak from my rear main seal and my rear diff for quite some time. The older I get the less I feel like getting under a car for some reason. I wish I had invested in a lift long ago but here I am. Im not sure what can of worms I’ll be opening up because I’ve had the vehicle...
  6. T

    Any good videos on replacing a head gasket on a 318? Found a brown milky liquid in my 74” RR valve cover and some white smoke from the tailpipes.

    I need to rebuild the carb this winter and figured now I’m going to replace the head gasket now too. Possible valve cover seals too. Would love to watch a good video on it to refresh some old skills. I’m not positive yet it’s the head gasket seal…but fairly sure. Hard to see in the picture but...
  8. T

    Small oil puddles on both side of manifold. What’s the likelihood of it being oil coming up from the bolts and not leaking from both valve covers?

    Noticed some oil on both sides of my intake right near the bolts. It’s a 74’ RR, 318, 4bbl carter, Edelbrock intake, mild cam original heads and block. The valve covers are recent (but I didn’t do them) the bolts on the edlebrock do not look recent. Is it worth trying to put thread locker on...
Back
Top