Search results for query: *

anyone know if these are reproduced? can't find them on the usual sites ...

anyone have the measurements for the two holes needed to mount this emblem? THANK YOU

Hi folks, as I'm restoring my car I'm making into an R/T tribute and haven't been able to find info on whether or not I need to make new holes to convert from the standard charger emblem to the R/T emblem on the rear tail panel. Anyone? I'm at in the final stages of body prep for paint so want...

hi folks, I would like your thoughts here. I installed the drivers door and fender to do my initial gap and panel alignment as part of this restoration and had all the lines and gaps set to near perfect. I then installed the door latch/handle and a new door seal, from soft seal. Now, because...

hi folks, looking for your suggestions on how to address this alignment issue in the photo. Other than this fitment issue everything else lines up. Original doors and new AMD fenders on both sides. The driver side fits perfect, only the passenger side has this issue. The only solution I’ve...

hi guys, I’m rebuilding this area in my charger and really need some reference pics to get the curves/bends right. Both sides are rotted out so I don’t know how exactly the Dutchman meets the sail panel and both to the window channel. See photo. Thanks in advance

Hey guys, can you help me with a few photos of this area under your charger? I made my own rear brace and bought a new rear valance and corner pieces. Need to see how the rear valance and rear cross brace are supposed to connect, and where the rear bumper guards fold down under. I could not...

hey guys take a look at the photo, should this tab on the inner wheel house be on the inside of the outer wheelhouse or the outside like it is in the photo?? ( 5” inch overlap at the bottom of the middle seam)