Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi I have a 68 satelite and I want to know how do I put the grommet with the metal tabs that goes in the firewall on my front parking brake cable. I got a replacement grommet and all new cables because one was frozen and locking the car from moving. Do I need to cut a slit in the grommet or are...
Which rear end overhaul kit is best for the 7.25 rear end? I’m not looking to upgrade I’m looking to rebuild what I have. https://www.summitracing.com/parts/spz-37000 Or this Yukon Master Overhaul kit for Chrysler 7.25" differential | YK C7.25 | Yukon...
I was taught at penn tech. Keep the gauges the same and weld the new metal into the old metal. If your angle is from old to new you will burn the old metal more easily.
This is the subframe on the passenger side. I guess I should replace the whole subframe with a new piece. Or should I fabricrate. I think I have to take the motor out and the fenders and hood too.
Hopefully this is the right topic to post on. I want to know the gauge steel the front subframes and the crossmembers are on the 68-70 b-bodies. I plan on patching the these parts. I have a welder, gas, and mild steel to bend.
The car is just going to be a driver on 15x7 torque thrusts. I’m only doing the front for now. I plan on making the car faster and upgrading to stop and handle better as a pro-touring car. Full auto-cross is way to racecar on a 116inch wheel base unless I go ballistic and cut the car up to move...