Search results for query: *

Since you all were so awesome helping me with my starter issue, i have another issue. the car ran good last summer with the exception of the vapor lock issue. Now I seem to have another fuel issue. I have a fairly stock 440 with an edelbrock 800 on it. the car seems to need a prime all the...

I have a 69 RR that I just finished last summer. While over the winter, I developed an issue with my starter. Sometimes you will go to crank the engine and you will just get a clicking noise from either the starter or the relay. cant tell which. Sometimes it will just crank right over with...

I have a 69 Roadrunner with air. I am installing an air grabber on the car. Have everything done except the cable to the inside of the car. I have found pictures of where the cable should go on a non a/c car but no pics of an a/c car. can anyone help me?

I have a 69 Roadrunner that someone did a disc brake conversion somewhere down the road. I am trying to find rotors for it but can not seem to figure out what I have. The rotors are 11.75 diameter so I am pretty sure they are from a C body but cant figure out what to buy them for. Can anyone...

Ok...so I have my 440 motor rebuilt and want to break it in on the run stand before putting it in the car. My car has a 727 so I borrowed a bell housing and flywheel from some friends to run it on the run stand. The bell housing is a Lakewood style blow proof and the flywheel is a stock fly...

I have almost finished my restoration of my 69 Roadrunner and one of my door glass windows goes up and down really hard. I replaced the felts and weatherstripping in the tracks along with new window fuzzies and such. My car was a basket case when I got it and I got lots of extra parts with it...

I have a 69 RR with a 440. Motor is stock 440 with original pulleys. Has A/C. Radiator is stock replacement radiation (26"). Having trouble finding a clutch fan to fit the car. Clearance is very slim between water pump and radiator. I have a fan that fits but there is only about a 1/2...

I have a 69 RR with a/c. the question I have is that I have the vent hose running from the junction box under the dash to the passenger side dash vent. Is there some sort of a trim piece that goes under the dash that holds the vent hose up and hides the heater box and its valving?

I am working on the brakes on my 69 Roadrunner. Previous owner did what he told me was an E body disc brake conversion. took my rotors off to have them resurfaced. part store told me they are too thin and i need to buy new ones. that is fine but when we looked up the rotors, the rotors on...

I am putting a 440 in my 69 Runner and hooking up air conditioning. Trying to make look as stock as possible, but I also want to run air grabber setup. Problem is that using the stock a/c compressor will not allow me to use the air grabber air cleaner. Even if I did not hook up the a/c right...

Getting ready to install the seat belts in my 69 Runner. I inherited a big box of belts with the car and most are not marked as to where they go. Only ones I was able to figure out were the shoulder harnesses. Anyone have advice or pictures or better yet a diagram of what mounts where? Car...

I plan to install air grabber setup on my 69 Roadrunner so I swapped out my 2 speed wiper motor for a 3 speed unit. Bought new wiring harness under hood so everything plugs in as it should. I was told that if I bought the correct 3 speed wiper switch that it would plug right into my existing...

can anyone offer advice or measurements on how to lay out the stripes for my 69 Runner?

What is the difference between belts for a bucket seat car and bench seat car? Is it just the number of belts? I need to buy black belts for my 69 since I have 2 sets of green ones. I think one set of green ones is from a buddy seat car, but all belts were thrown in a box so not even sure...

I am replacing the 318 in my 69 B Body with a 440. I am told that I need to buy torsion bars for a 440/426 and the numbers I need to look for are 780 and 781. Can anyone confirm this? Anybody have a nice set to sell? I see Summit sells new ones but they only list the diameter. Can someone...

I am installing the headlight buckets on my 69 Roadrunner. I bought a parts kit and figured out where most of the parts go. some parts I don't know where they go, unless it is a universal kit and they just throw in parts for different applications. I am not sure of the installation of the...

Can anyone post pics of where the 69 Roadrunner horn should be bolted?

I am venturing into my first Mopar project. I have my Roadrunner on the rotisserie and have finished up all the work underneath and am working on the sides. Hoping to get underside as well as engine compartment, trunk, and interior painted in the next couple weeks. After that, will start...