Search results for query: *

Do you know what the range is from the C to the H in degrees F?

The temp gun reads 200 at the water pump and 170 at the radiator. How are those numbers??

I installed a shroud with an electric fan. It was 108 degrees F here yesterday, and this is as high as my gauge got. It was driven and then left to idle. Too high????

I would like to correct myself. My billet aluminum rear seal holder leaked. I suggest staying with the original holder. Now the screw-in guides it came with are good. You can make some. I used them to guide in and center the original housing. Works just fine now.

I posted a response to this post earlier and now I am speaking from my experience. Stay with the original rear main seal housing. I bought a billet aluminum housing and had nothing but leaks. I went back to the original with the Fel-Pro rear and side seals and it's fine now. Guess Chrysler knew...

Hello, Do you have any chrome Chrysler boxes for sale?

I got mine from Indy Cyl Heads. Works fine. This may have already been said but remember the main seal can only go in one way. The raised edges go toward the front of the motor.

About 450 HP. It's a mild build a bit above stock. I live in the desert, and during the summer, it got warm sitting but never overheated. Call Cool Craft and see what they say. I would go with a 26-inch if you can fit it. Bigger is probably better when it comes to radiators and high HP big blocks.

440. Stock plus a 509 cam. Electric fan. Plymouth GTX, 1966-69 V8 383/426/440 22 Inch Wide Aluminum Radiator - Cool Craft

I got a 22 inch aluminum from Cool Craft/US Radiator. Works great.

Make sure the orange box has a really good ground. Carefully scrape some paint where the ground makes contact with the firewall. Orange box was my problem. I got a new old stock NAPA chrome box. Works better than ever.