Search results for query: *

Who makes the best valve bodies for a torqueflight 727 in a 400 hp 383. Are they reconditioned or new? Street strip (I want to be able to get a smooth shift in Drive, but be able to shift with slap stick without tearing it up. No racing (on track). I have a race kit in it now and it won'f...

I never see any 440s with 2 quads on the. At least not on a 67 Plymouth Satellite. Why not? Does that not make a descent set up? Or is the 6 pack better. I'm running a 850 pro Holley right now,915 heads ported polished , headers 3" exhaust, digital ignition, 373 rear end. Am I crazy to...

Here is my problem.......got the new SS lines. Took them out of the box and straightened the tank to pump one out. Got the 67 Plymouth Satellite jacked up and looked at the line the restorers put in. Appears they spliced a 3/8 line from where the bends go from the sill to the tank. They did this...

I would like to get some cold air going into a 440 in a '67Satellite with headers. There is very little room to work with in the engine compartment. Two problems....I have a drop down Mopar air filter housing on a 4150 850cfm Holly that will only take a 2" filter. I may have an additional...

I just rebuilt the valve train (did not remove valves). The cam is new, but is the same one from Comp Cam that I took out. All the components are Comp Cam. Bottom line is that I cannot get the power I had before the change, even when I had 5 broken lifters and nearly all pushrods worn at...

Take a look at the photos of the 440 rocker arms and give me your opinion as to where the wear is coming from. More importantly, why?? I have asked for help, and got it, relative to the breakage of lifters, the severe wear on the push rods and the adjusters at near max. I ordered a new cam...

I believe I have a stuck lifter(s) on one of the 8 cylinders. I have not noticed a problem with driving or idling, but when I decided to zero the lash on the valves, I found that the exhaust valve rocker and the intake rocker on #4 cylinder would not zero. I have run out of threads trying to...

I posted this request on the 1966-1970 tech forum but thought I might solicit additional comments here, before I go off and "take a chance" on setting the valves with arbitrary numbers. When I bought this '67 Satellite, the engine, 440 HP was boosted to 560HP. I need to adjust the valves and...