Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello
There must I see, if this cable is still present in my wiring harness?
Could I get these two plugs A and R connect directly?
The two are chart here in the wiring also directly connected?
Or use a 0,205 mm² (24 gauge) wire? And good?
http://www.mymopar.com/downloads/1969/69CoronetA.JPG...
Hello
Must the switch with any what cable be connected to?
Don't I understand these 4 measurements?
How to measure?
High-Speed- Position:
B F1 (-28 Ohm { Widerstand durch den Schalter Widerstand } )
A bis F1 (-28 Ohm { Widerstand durch den Schalter Widerstand } )
Medium Speed Position:
B F1...
hello
Don't I understand these 4 measurements?
How to measure?
Chassis ground, is that the housing of the switch.
Be made the measurements at the switch built in?
Must the switch with any what cable be connected to?
gruß
Franz
Hello
So support the engine bench test.
Three Speed Wiper Motor Bench or Firewall Four Wire Terminal Test.
http://www.passion4mopars.com/Testing-and-Wiring-a-3-Speed-Switch_b_46.html
When the switch is plugged in, only one stage works, and the engine will not die back to the Park position...