Search results for query: *

See the link below for the cast Mopar Performance valve cover sets. Mancini claims they are bringing them back for a limited time so get on the list if you need them. Always see people asking for these so just wanted to give you all a heads up when I saw this. Mopar Performance Cast Aluminum...

i bought a 1969 4.10 Dana 60 rear end for a b body. The axle/spring perches have been removed so I need to re-weld them on. Anyone have the measurement and where to measure from to make it the easiest to locate? Also, anyone have the number of degrees I want to weld them at relative to the...

Posted it on my 500 stroker build thread, but figured some might not see that. Finally fired it up and broke the cam in Saturday.....runs perfect and sounds mean!

Well I am ready to drop the motor into the car next weekend! Spent all weekend wrapping up some small stuff like engine mounts, sealed up the intake, dipstick, etc.... I am sorry in advance. I was going to do a build thread, but every single thing fought me on this build and I didn't have enough...

Quick pushrod question. I have pushrods that are the correct length ball and cup style on top and ball on bottom but they have small oiling holes in the ends. These should be no problem to use on my RB stroker correct? Correct length and 3/8 good quality just have the holes in them. Seems silly...

I currently have a 6 quart oil pan on my charger but it rubs the drag link when installed. I’m building a 440 stroker for it as we speak and I want to get a 6 quart pan that will fit the car correctly. I have no clue what pan came off the car but I know it’s not fitting correctly and has rub...

Anyone know the Felpro P/N for the head gaskets that are .051 compressed and have a 4.410 bore size? I can't find it anywhere. I can only find the one with a 4.590in bore.

I just sent the block to the machine shop, but when it comes back, I was curious if anyone would be interested in me taking some pics of the 500" build and documenting it on here? I have never done a build thread and wasn't sure if there would be much interest. I know there are alot of engine...

Any difference in main caps from the forged crank motors to the cast crank motors? I have a 68 440 that has main caps that are cast colored. I am redoing a 73 440 that had a cast crank that I am using for my stroker rotating assembly and the main caps are almost black (very dark) in color in...

So I had some serious **** going through my motor. The block is junk as the scratches are way deeper than I can bore but I think the Pistons are salvageable. The crank, rods, and all the bearing surfaces are untouched but the cylinders seemed to have take the brunt of it. I have no idea what...

Ok before I get jumped with knives :D:D, I am just going to ask this question as a general rule....I am running a Hydraulic Flat tappet cam in my 500" stroker motor and I was looking at push rods. I am thinking using a hydraulic lifter and an adjustable rocker arm, that there is more room for...

Looking to get a cam for my 500" Stroker build this winter. I have talked to Dave at Hughes and he spec'd out a cam for me that he said would run pretty well on the street with 3.91 gears and a 4 speed. See below: My question is has anyone dealt with Engle cams? I called and talked to Chris...

Got a 440 in my Charger and am curious if I can snake the oil pump out without dumping the oil. All or most of the oil is in the pan correct? Cars been sitting awhile so i figured it was bled back and the pump should come without too much mess?? Or should I dump the oil first? Cars oil pressure...

I have a 500" stroker using the Comp XE295HL cam and am curious if I have enough valve spring to control this high lift and duration cam. I have Edelbrock RPM performer heads which I belive have the standard springs with whatever they come with. Here are the cam specs and spring specs. Whats the...

Looking to see peoples opinions on this cam. I have one in my Charger with the 500 in. stroker (440 block) and am curious how everyone likes the cam. Is it really that big of a cam? Mine idles kinda tame with the stroker but duration looks rather large for the street. My car is a 4 speed.

Ok, I know there are a ton of articles on here but I want opinions from engine guys for my specific combo. I just bought my buddies 68 Charger that he had from his wife as he passed from lung cancer in May. I am trying to rid of the tunnel ram and 2 4's through the hood and stick with a good...

Ok, I keep reading that we need a drop base for our air cleaners on the big blocks using the Edelbrock RPM intake. Ford racing makes one supposedly? I am trying to keep the stock unsilenced top with the pie tin for stock looks. I hear this is 13" diameter? Anyone know where to get one of these?

You are going to want to kill me for even mentioning a GM product on here but.....I have possibly came up with a solution for all of us running dual feed Holley's on the big blocks. I ordered a fuel line kit for a 68-69 Camaro with a factory dual feed Holley carb setup which uses 3/8" feeds that...