Search results for query: *

That's a good question, need to clean up the spindle and take a good look. Any sort of a groove is bad, correct? The machine shop is an interesting solution. I wonder if that's something they do frequently, I'll investigate after the weekend, if that doesn't pan out I'll PM the guys with the...

I spun a bearing race on my front 10in drum hub! I'm pretty sure a new bearing/race set will be a waste of time and money! A quick search indicates that I might be sh*t out of luck in finding a replacement hub. What are my options here, anyone run into this situation?

Okay, thanks for the help!

I guess a test drive will help, which I can't do until some parts come in............but pushing down on the rear bumper compresses the shocks maybe an inch or two, and I have to push pretty hard!

I DID have a bit of an oversteer, always thought is was from the air shocks........even though I never had then that high up. I don't know how much you can see from the pics, but my springs are not "reverse arched", right? Regardless I obviously need springs, can you recommend a good...

Yes, original springs and they're pretty flat! I guess using air shocks all this time did them in! So I'm probably not going for new springs before the season is over, any suggestions on what do use to get it to factory level? Thanks.....

I've been running with air shocks for probably a decade! I decided to put back the correct shocks and the back-end slammed (well almost). The shocks were brand new ten years ago, can they go bad from being uncompressed on the shelf for that long, or did I kill the leaf springs?

No, never tired putting the points style VR back in!! I haven't seen that thing in over a decade, but I'll start digging! I'm now curious myself...........BUT, I wouldn't be surprised if it made no difference, because I'm seeing a 2 volt drop at the blue wire going into the VR, so the system is...

Well that's a direction I never considered and honestly, didn't know about. I'll do some investigation if I run out of options completely, or if I lose my wits entirely. As for now, I would actually like to understand what my problems are and have a good stab at it instead of changing stuff...

Hello all, I'm brand new to this site but have spend countless hours here in the past, especially recent past. So I'm nearing my wits end with this problem and am on the verge of throwing in the towel. This is a long story, but will try very hard to condense..... 1966 Charger 383, about 10 or...