Search results for query: *

Hey Guys! I finished my 1965 Satellite restoration a couple years ago and things have gone smooth, until I started having trouble with my carb. Runs good and smooth, but just every now and then when I'm pulling out into traffic; it will just cut off. Then it is the trauma of oncoming traffic and...

I have had problems with my Stromberg 2 bbl carb since the start of my rebuild. I have had it rebuilt twice and parts changed even more. The latest episode has been an issue with the accelerator pump not moving when I accelerated, cutting off the engine when I start off. We changed the pump and...

I have a 1965 Plymouth Satellite with a 318 poly engine. Engine and most every other part has been restored or rebuilt. I have developed a problem in the last few months that has me stumped. I start out from a stop and turn left to move into traffic and it cuts off. Not every time but randomly...

I have a 1965 Satellite with a 318 poly engine. Engine has been rebuilt at Christmas last year, trans is new rebuild, carb has been rebuilt. Now, my problem started a couple days ago. Everything going fine, great day cruising in my Plymouth; I turned out of a parking lot on to the main highway...

I'm having trouble with my park cable. Sometimes, when I put it in park, it still rolls then catches. Is the adjustment hard to do to fix this? Also, I am having a problem with leakage of trans fluid through the cable coating. I know that Schumacher Creative Services sells these cables, but...

I am in need of a a/c vent on driver's side of 65 Satellite. Anyone know of a source or anyone having one?? Thanks,,

I have a 65 Satellite with a 727 transmission; cable drive. I was having a bad transmission leak, so I took it to a transmission shop and they replaced all the gaskets (which was probably needed anyway), then a couple days went by and I noticed more transmission fluid leaking. Come to find out...

I have a 318 cu. in. engine in a 1965 Plymouth Satellite and had a under the dash wiring problem that resulted in frying my wiring harness. I was wondering why my fusible link didn't burn in two. It did fry the coating off of the fusible link wire, but the wire itself didn't burn in two. I had...

I have just replaced the after market carb that was on the car when I purchased it and replaced it with the orginial carb that I found in a box of stuff that came with the car. It is a Stromburg 2 bbl. Got it rebuilt and put it on and realized that I don't have a choke rod for the carb to the...

Can anyone, off the top of their head, tell me what bulb is used in the automatic shift indicator and the tach in the console for a 1965 Satellite?

I have had the speedo calibrated and when I installed dash assy. the speedo is off 15 or so mph ( too fast). I don't understand why it wouldn't be the same gear(at trans) with my using the same transmission and same engine and same rear end and same dash assy. . I did use 225/70-14 instead of...

I asked you guys about a radiator over flow container and tried to identify one in one of the post. Well, I found one that worked great for my car and it looks like the one shown in a previous post. It is out of a 1995 Ford Probe and it tuckes away between the grill and radiator support. It took...

I decided to change my car from amp meter to volt meter. I took the wires that went to my amp meter and ran them to my volt meter. When I hooked the battery back up I had no interior lights/radio/horn/ cranking...etc. So, I decided that the gauge must be bad and I took it back for a new one...

I've been having a few problems with my console lights that you, guys have been helping me with, but I've gotten caught up in a disagreement with a guy at the parts house. The courtesy lights on my console use a 90 bulb, which has 2 contacts and single filament. After tracing the wiring, I...

I have finally gotten my console back into my car and plugged wiring back (big 6 prong plug) but I don't have any console lights. There is another plug there; a 3 prong plug with an black, orange, and blue or purple wire and I don't have anything to plug it into. I'm thinking that it is the...

I am restoring a 1965 Plymouth Satellite and I am trying to restore the console with a tach. The block out plate looks like a 3 inch tach would fit. Can anyone tell me the dimensions for the tach and where I can purchase one? I would love to find a stock type tach, but will settle for a new...

Has anyone got any advice about how to polish a grill on 65 Satellite? Is it anodized? And if so, how do you get the anodizing off? If not, what do you use to polish, or do you chrome grill? Thanks for the advice in advance!

Who is reproducing sheet metal for 65 Plymouth Satelitte? I need the cowl corner drivers side. Actually, can anyone give me other sources for purchasing parts for my car?? A catalog to look through would be great.