Search results for query: *

Ok since you now know the make of the alternator there is a recent issue with it. It has been working with no issues for a while. Now the fld brush was poking out and I could see that it was not riding on the copper ring. I took it out and repaired it just to see if it would charge. I...

Looks like its very doable for even a numb nuts like me. I have an old amp gauge and an old voltage gauge laying around I will see if I can do this with a video. https://moparconnectionmagazine.com/how-to-convert-an-ammeter-to-a-voltmeter-on-the-cheap/ Moderator should sticky this link. Useful...

I know this is old hat for most of you guys but figured I would post the video I made today of the cluster board change out. Just in case someone new doesn't know.

Ok this is more of a question on how much it would cost to get a set of Dakota Digital gauges installed. The guy I did the 5.7 LS swap for now wants me to install a set of Dakota gauges. It doesn’t look terribly hard to do and I know I could do it. But I just don’t know what a fair price would...

Well over a year ago I installed a Sniper on the RoadRunner. Last week the orange box took a dump. So I will be installing the Hyper Spark System on the car. I have the distributor already installed, coil mounted new plug wires installed. Tomorrow I will do the mounting of the ECU and cleaning...

OK I have the engine in this Olds. I have the sniper plumbed in from tank to Sniper. I have the fuel pump working and the screen for the sniper lights up. I setup a basic 350 with stock cam and no power adder,Idle speed set at 750 rpm. So just a basic tune to get it up and running. Here is where...

I have a few wires that I can't find in the schematic. There is a shorter blue female connector in the alternator area. Then there is a longer blue wire in the same harness that has an angled female connector. And off the same harness by the firewall connector there are 2 wires I cant figure...

OK here we go I bought a harness from my mopar dude. The box it came from was labeled 1969 GTX so I assume the harness came from a GTX. I found a few connectors that do not jive with the roadrunner harness and setup. I did figure out that this harness includes a lighting package for the ignition...