• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Search results for query: *

  1. cheeseburgerhead69

    62 Plymouth, Starter won't disengage

    HELP GUYS, 62 BELVEDERE, 413, My starter won't disengage after the engine starts... Any ideas.. Everything is new, relay, starter, ignition, wiring. Any help will be greatly appreciated. Thanks, "Cheese"
  2. cheeseburgerhead69

    '62 Fired up for the 1st time in 35 years !!

    This Belvedere was a Drag car at Scribner Raceway in Nebraska back in the early 80's. Fired her up with a 413, installed over the last few months. Sounds Awesome, it's been a really fun build. Some final tweaks are needed but happy to hear her roar. Still wearing her colors, although a bit faded...
  3. cheeseburgerhead69

    Manual Steering box help

    I got a 1962 Plymouth with Manual Steering, broke my steering box, Just received a used one today. Pulled the Pittman arm off and my Pittman arm is splined larger than the shaft on replacement ??? The replacement was supposed to be a 1962 unit as well but obviously not the same. Any ideas... I...
  4. cheeseburgerhead69

    Manual Steering box 62 Plymouth Belvedere

    Broke the case on my steering box this weekend Boooo !! had one from a early 70's a body but the Pittman arm off the 62 is loose on the 70's box. anyone have info on change over, what years will work for 62 ??? Or if you have one to sell let me know !! Thanks !!
  5. cheeseburgerhead69

    62 Plymouth Belvedere drag link, Pittman arm, Idler

    oil pan clearance, anyone have info on drop down components that will clear the oil pan on a 413 in a Belvedere ?? Mine doesn't touch but it is very close. Can a guy modify or use idler, Pittman from other models to achieve more clearance ??
  6. cheeseburgerhead69

    chrome trim retainers, clips

    What retainers, clip are people using for fastening chrome trim to fenders and 1/4's for 62 Plymouth Belvedere ???
  7. cheeseburgerhead69

    62 Belvedere bulkhead connector help

    Ordered a 62-63 big block bulkhead engine wiring harness, trying to install it and it looks all good except for the plastic connector that slides into the bulkhead. the plastic tab won't allow it to fully insert it in, unless I cut that tab off.anyone have a picture of a correct bulkhead with...
  8. cheeseburgerhead69

    62 Plymouth 413 motor mount ????

    I have a 62 Plymouth Belevedere, trying to figure out the motor mounts... I have 65 413 from a Chrysler. I bought upper engine brackets for a 62 Plymouth BB, they bolt up fine, I have the lower mounts that came with the car, it had a 383 in it prior to this, I bought it with no engine. I got...
Back
Top