Search results for query: *

Can anyone tell me what to torque the bolts on the crankshaft pulley for a 383? Thanks.

Does anyone sell a kit for the exhaust manifold nuts. I believe there are 9 nuts and 3 extended nuts. The car is a 1967 383-4V. Thanks in advance

I'm trying to remove my exhaust manifolds to send them out for ceramic coating. How do I remove the 2 bolts that are in the water jacket holes on the manifold? Is there a special tool or is it a 9/16" socket grinded down to fit in the opening? Many thanks

Should a clutch fan spin freely or should it have resistance? Can you replace the bearing if necessary?

My power steering pump is mis-aligned with the water pump pulley by 1/4". See rough diagram (picture doesn't show much). When looking at the engine the water pump pulley and the left side power steering pump pulley is in line. The right side of the power steering pump pulley is approx 1/4"...

On a 727 transmission there is a cable running from the starter solonoid to the side of the transmission. What is this cable called and where can I get a replacement.

What oil and filter is everyone using now a days. My car puts out 400hp and sometimes sits 2-4 weeks between starts. Motor has less than 5000 miles since the rebuild. I have been using a K&N HP-3001 filter.

Can anyone tell me where I can get a set of spark plugs wire seperators for a 1967 Plymouth Satellite with a 383-4V. I believe there are 4 pieces. One bolts to the thermostat housing, one to the windage tray and 2 to the exhaust manifolds. Many thanks iñ advance.

Can anyone tell me the length of the carburator rod for a 1967 383-4v engine? Pictures I have seen shows the rod with a slight bend. Mine is straight and may be short. Can't seem to get the right adjustment. If I need a new one where can I obtain one. Thanks.

I have a 1967 Satellite with the 383-4V engine. I need info on the front throttle spring as too where I can get a correct one. I have the correct rear spring. Thanks in advance