Search results for query: *

Has anyone tried to Hydrogen Peroxide and Oxy-Clean in the sun trick to remove the yellowing and hazing of old taillight plastic? How did it work? Jim

Anyone use the OER seal? The last once I used was Steel which I have found to be very high quality except the front glass seal split. The OER is 1/2 the price so it make me nervous.... Jim

Several have said these work great. Does anyone have one and can show me how they are used in a photo? https://www.classicindustries.com/shop/1968/dodge/coronet/parts/?q=wiper%20arm%20removal%20tool

http://www.beaparts.com/list_items.aspx?body=B&cat=E&subcat=33

Anyone successfully disassembled a remote mirror to have the housing rechromed?

Well I knew I was pushing my luck with 6k miles in Arizona without a rock to the windshield. The Coronet glass was not original but it was likely installed in the 70's. I took a rock yesterday and put a 1/2" crack around the chip. Anyone used the auto parts repair kits on old glass? I could...

Full of questions this morning.... My front bumper was replaced due to an accident in the 70's. The car had the protection package with the guards but the replacement did not have them. I would like to put it back to either both end have them or both don't. Are the bumpers different? I can't...

I am starting to plan when I want to replace the glass in my Coronet. When I did the restoration I was happy to say the glass was original. My expectation of the paint and body work was low but it turned out too damn good. There are a lot of scratches from trying to get the trim off from...

Anyone buy the AMD bumpers for their '68-'69 Coronet? How close to the original are they? Did they fit well? Finish quality? Jim

was the blackout on the radiator support paint or more like undercoating?

I was keen on painting the gas tank of my 500 orange with black straps to match the car until I opened the box from Tanks Inc. That tank is so shiny! Are there any negatives/positives to painting the tank? I am torn now. Opinions? Thanks Jim

My Coronet had an aftermarket antenna on it. One of the members here sent me a bag of antenna parts off another 68. The chrome bezel seems way to big to fit in the fender hole. I have had to open up all the openings after the paint job but this seems really excessive. Anyone have a photo of...

Anyone recommend a reproduction antenna that will stay put for my '68 Coronet? Thanks, Jim

1968 Dodge Coronet 500. I just realized as I am assembling my 500 that the hood does not have a chrome trim across the front edge lip. The trunk has a chrome trim along the lip. How can I tell if this car should have a piece of chrome on the hood? Thanks, Jim

My 500 was in an accident long ago and several parts where replaced. On the headlight trim there is a feature stamped in the sheet metal that make it look like small squares (to mimic the center grill). On one side the black paint is in small squares with fine lines of the brightwork of the...

I just realized I did not paint the drip rail area on my Coronet well at all. I can't recall on a hardtop with a Vinyl top is there any paint showing when you look at the roof line once you have the top, headliner, chrome trim, weatherstrip and interior trim installed?

My '68 Coronet was painted back in the 70's with enamel I am sure. The shop opened the trunk and just sprayed everything in sight including the backs of the taillight housings. I have been pondering how to get these stripped without damaging housing so it still looks nice when it is bare (I am...

Ok I followed suggestions here and else where on removing the old undercoating with a heat source and scraper (actually a Dremel oscillating tool with a scraper blade works great). Now what is the recommend way of removing the remaining residue so one can spray epoxy primer with high confidence...

'68 Coronet that appears to have had body work in the 70's sometime. The drivers fender is a replacement (factory likely?). The original (passenger) had a ding in the corner that had about 8 holes drilled to pull it out that I had to weld closed and fill, but…. look at the photos. The factory...

could anyone with a 68 Coronet take photos of the key latch area and a few shots showing the curvature of the trunk lid after it rolls over and angles back (were the key hole is) or is is flat? I am needing to rebuild mine and it has already been hacked on and the key hole is brazed and...