Search results for query: *

Does anyone know what the target temperatures in degrees F Chrysler was aiming for in the "normal" range on the temperature gauge? Jim

There was somebody on one of these boards that rebuilt AC switches and understood all the different variations can anybody remind me who that was thanks

Anyone ever use these guys to restore an original water pump? I got a quote from them a while ago but did not pull the trigger. Bought a GMB. https://egge.com/info/water-pump-rebuilding/ Aftermarket is junk.......

Can anyone verify that the heater hose that comes out of the water pump goes to the outer most port in the firewall (the heater core nipples) and the hose from the manifold goes to the heater control valve? I think I know why I don't have blend between AC and heat and the AC is not as cold as...

The AC controls. Is it normal for the blower fan and the connector at the back of the vacuum switch (makes the contact for the AC compressor clutch) to get so hot that you can burn your fingers on the pins? I had to rebuild my vacuum switch (the plastic pins were brittle and the back snapped...

For those that followed me restore my '68 318 Coronet they know that I went through _everything_. The 318 was rebuilt very mildly to factory tolerances. New GlenRay reproduction radiator, GlenRay recored heater core (factory A/C car), new... well everything else, hoses, water pump, H valve...

Has anyone successfully installed a new shaft seal? I am struggling the remember the stack up of the multi part seal and have failed to get it to seal. The manual and parts book are useless to see the details to the level I need to see them. I can not find anything on the web that shows the...

Comment on this for old cars? http://www.oreillyauto.com/site/c/detail/AFZ2/LOWTOX.oap#itemDetailTab_ It is glycol instead of the new modern formulations.

Got my reproduction from Bob today. A work of art. It is an exact match of the original including date coding right down to the font and font size. If you need a radiator Bob is the guy to call. He recored my AC heater core as well a few months ago, just as impressive workmanship. Just a...

'68 Coronet with AC. How many fan speeds should there be? The fan switch has 1) All the way out seems to be off (fan does not run) 2) Low speed 3) Higher speed 4) ? The switch seems like it could go further but is mushy and feels like something will break if I push any harder

Anyone have a photo of the upper radiator hose for a '68ish SB with AC and the HD 26" radiation that they are sure is the original shape? I bought an AC Delco one and though it does fit it seems a bit stretched.

Is this factory or aftermarket from years ago? Not seeing a Chrysler part number on it.

Are the J-Bolts that bolt the large air duct to the air intake on the passengers side available? There is one in the front and one in the back on my '68 Coronet with AC. One was rusted out and snapped on disassembly.