Search results for query: *

If anyone is interested in making headrests for their 66 Satellite with Bucket Seats - I've just done the job. Manufacture I started by buying a couple of head rests off a modern car from the scrapyard. I stripped the material covers and split the polystyrene inners apart. I then cut the...

My '66 Satellite has buckets that tilt forward but have no locking method (as do all '66 models I assume). Coupled with lap belts and no headrests I'm thinking this would be pretty bad in the event of a crash. Anyway, I'm on a mission to try to improve things. I've locked the seat backs with a...

Hi, I'm saving for some TTI Headers for my 318 poly and want to get the mini starter that is required for them to fit. TTI's website lists the following options: Chrysler R53005984 or 56027702AC Mopar Performance P5249644AB or P5007860 Has anyone bought a mini starter for their 318 poly and can...

Hey guys, I was wondering if there was any standard color for a 66 Satellite/Belvedere Trunk Panel? I see some (usually original hemi cars) with red as the outline but also see some unpainted, just polished. I've also attached a photo of one picked out in black but on the opposite lines to where...

Hi guys, can you please tell me are the front turn signal lights on a 66 Satellite a dual filament bulb that light up as a sidelight when the light knob is pulled out one click? I'm talking the 2 inner round lights in the front grill as per the attached photo. At the moment the only time they...

Hey guys, can someone tell me if the front seats on a 66 Satellite tip forward to allow access for rear passengers without disengaging any lever? Mine simply tip forward when pulled - I can't even see any locking mechanism. The reason I ask is I'm just about ready to register the car and have...

Hi can someone pls post a pic of their trunk showing how the spare wheel and jack accessories are stored? I know the trunk sticker shows it but mine is dodgy and the images on the internet get blurry when I enlarge them. I can't believe I'm at this stage of the project, at one stage I never...

Hey guys, starting to put the front of my car back together, part of the restoration I'm attempting. I removed the bracing plate behind the brake master cylinder to paint the engine bay and can't remember if there was a gasket between the plate and the firewall or if it was just metal to metal...

Hi I'm removing my k-frame, engine, and trans and need to disconnect the steering from the box. Is it easier to remove the steering column from the coupler or remove the coupler from the steering box? Thanks

Hi guys, I'm restoring a 66 Satellite and need to weld in new Upper Control Arm Mount / Shock Tower Braces - one on each side. Does the motor need to come out to get enough access? It's got a 318 Poly which is pretty wide and there doesn't seem to be much space. The steering box looks pretty...

Hi guys, In pulling apart my front suspension on my 66 Satellite, I've noticed rust in the mount for the upper control arm. It's worse on the drivers side but I want to replace both sides. Rockauto stock a couple of items that seem correct: Goodmark "Shock Tower Brace" part no. GMK2130325626L...

Hi guys, I realise everyone will have an opinion on this, but as I'm overseas (in Australia) I need some help. I'm restoring a 66 Satellite (pics on the "Lets see all the cool 66-67 b-body mopar pictures") and am at the stage of rebuilding the whole front end. Basically I need Upper Control Arms...

Hi guys, as the thread title suggests, I have patched the floor pans of my 66 Satellite, but don't know where to drill the holes for the Accelerator Pedal. I've thrown out the old rusty bit which had the holes in, and want to get the angle right for the pedal. Anyone happen to have a 66 or 67...

Hi, I have a 66 Satellite that I am restoring. The tail lamps are a poor fit in the surrounds, with a small gap top and bottom between the chrome and the body coloured surround (probably 1/8"). Are they meant to be like this? If so should I seal with silicone to prevent water ingress? I've been...