Search results for query: *

Has anyone seen a source for the GTX hood scoops mounting set lately? Classic and Mega Parts seem to be listing them as backordered. If anyone has some partial hardware (studs, nuts and rear mount cups) laying around unused they don’t need, I would be interested in buying them. Thanks

Does anyone have a a real nice lower SS trim strip that mounts on the lower edge of the door panel on front hardtop doors. No dings, dents, bends, bad scratches or broken off tabs on the back side?

If anyone has a nice used 66/67 model Hemi 2-grove PS pulley they would be willing to part with reasonably, please let me know. Straight, no large dings on the grooves. This is the shallow pulley for the 1-5/8” thick Hemi balancer. Mega Parts has the reproduction for $250 on EBay so hoping I...

I would like to convert my manual steering to power steering in my 66 Satellite. I think this is a one year only column so has to be from a 66 B-Body. Not interested in a whole column if I can avoid it - just need the shorter shaft. I would be willing to swap the shaft if someone is going the...

I canceled my other ad as I found a right door trim piece for my Satellite. I still need a good restorable left rear quarter top of fender aluminum trim piece. Condition of anodizing is not important but I need a good piece for restoring - no holes, tears, crimped bends, crushed sections or...

Still looking for the following top of fender 66 Satellite aluminum trim in good, restorable condition - no holes, tears, hard crease crimps or bends, etc. condition of anodizing is not important. Still need right door and left rear quarter fender. Thanks

If anyone has a spare correct bolt and two of the conical washers for 426 Hemi exhaust manifolds they would like to sell, I will buy them. Hate to spend $70 for a complete new set and have a bunch left over.

Still looking for some 66 Satellite fender top trim for restoring - primarily the left rear quarter and right side door. Please contact me if you have any that is straight and restorable. thanks

Looking for rear top-of-fender trim (both sides) that is either good as is or at least straight and restorable. No kinks, holes, mashed sections, splits or previously restored pieces that are now too thin to repair and re-anodize again.

The entire roller assembly is missing on the rear of my 66 driver side rear, quarter window. This includes the roller that runs in the window frame slot and the double roller part that rolls up and down the guide track. 67 may be the same for this part - not sure but could probably tell from a...

I'm short two or three of the clip/screw mounts on my chrome set - I'm going to say three as I forget exactly how many I counted. these are the bent steel clips with a threaded stud that fit in the rear of the chrome band and secure it to the dash frame. If anyone has a couple or three spares...

I need the left side pieces from steering column to A pillar cover. Mine has a couple small rust throughs from heavy rust on the back. See photo if any question as to piece I'm seeking. https://www.amazon.com/photos/all/gallery/CcXGbLyrQuasGr4ErgzBbA?sf=1&ref_=APH_D_NAV I believe this trim...

Anyone have a spare harness to the glove box light and the bulb holder/switch they can sell? It plugs into the bullet connection/red wire lead off the main harness and has two leads - one to the cigarette lighter and the other over to the glove box light - all bullet terminals although it may...

Struck out at Napa and Auto Zone - on-line searching doesn’t give me much hope at Advance or O’Reilly. Just trying to get a period correct looking alternator without running funky ground wire to ground a second field, without a big square back, and with around 50 amps so less chance of frying...

Looking for a nice pass side (right) top of fender trim piece for a 66 Satellite. Hoping to find a nice one not needing re-anodizing but will consider a straight weathered piece with need of refinishing.

Have a 66 Satellite that I need a few parts for in nice condition: 1. Factory radio knobs for 66 2. Cigarette element knob for 66 3. Upper body side trim retainers (a couple of them). These are the plastic retainers that secure the top of fender/door trim 4. Also looking for a source of...

My current pulley has a bit of wobble and I’m looking for a no damage replacement. Current pulley has two large pulleys for AC in rear. Slightly smaller pulley for P/S next. And slightly larger pulley up front (about same dia as AC pulleys) for driving the water pump. There is a slight gap...