Search results for query: *

Ha. None actually. But it is missing a lot of paint down there :lol:

It’s a street car now. Prob has been its whole life but I have no history unfortunately.

What I remember about the episode was a conclusion that oil flow is more critical than oil capacity.

I’d assume then the Baja 500 is out of the question.

That helps about watching the dipstick. Thanks! Oh and also taking speed bumps at an angle. :thumbsup:

The SunPro oil pressure gauge idles at 75psi. I can’t be sure the gauge is correct but if it’s accurate is that too high?

Thanks. I wasn’t clear on it.

Follow up question. Does a deep capacity pan translate to the motor running at a higher relative oil pressure?

Sorry. Must be losing my mind.

‘66 Hemi Satellite. First change. No ownership history or docs. Service manual is 5 qts incl filter. I took between and 7-8 QTs out and was reading at the fill line (maybe another qt to be full)? =8-9? Does the pan look aftermarket higher capacity? Thanks!

Used Lacquer thinner and a plastic scraper. Looks 100% better. It’s hard to pick up in the photos but I left some red patina on the handle across the middle.

Thanks. Good idea. Yeah I have a similar DECAL WORKS plastic applicator. I haven’t tried yet but believe will have to soften the paint before scraping off.

Yep. You gave me the right source! The CI description photo is hopefully accurate enough to give me more hope it will fit like I need it to.

That may be exactly it. A picture can be deceiving, but comparing the contour of how far in toward where the pedal is, the classic industries part appears a more pronounced indent than mine. Before I removed it that same area had a noticable gap between the piece and the actual flooring. I just...

Definitely painted steel (someone didn’t prep).

Btw, congrats. Easy to tell you have a beautiful car!

Ok. From your pic looks like the carpet covers the factory opening at the lower boot.

This will help show the full picture. What’s weird, and sounds like what you’re talking about same too, is there’s already existing console panel there covered over with this piece. The extra panel was fitted under the top plastic console trim like the factor console you see is. The console...

Sorry to ask. Checked with service manual which helped where this part is of the overall assembly. But just need to confirm where I look. Embarrassed but rather ask. Is what @toolmanmike is referencing in post #2 about an access cover or is the linkage exposed?