Search results for query: *

Thanks for the help guys. I assume the FSM is the 2 volume Service Manual put out by Dodge?

Clearly the car is totally unsafe and dangerous. I'll save you all the trouble, just send me the car (or let me know where to pick it up) and sign it over to me and you'll be good to go. :)

Is there a step by step tutorial on redoing the front end suspension on a 74 Charger? Basically putting in a front end kit or something similar? There are several vids on youtube (nothing specific to 74 Chargers that I could find, just a 71 and I think a 73) that show certain parts of the...

I was just thinking. If I'm going to have steel trusses, spaced 10ft apart, that means I'd have four total. So I'm wondering if I could just run beams across those 10 ft spans, mounted to the trusses, and hang the bags from those? That would mean the support for the heavy bags was supported at...

So did you decide that I-beams were better and more economical than trusses for the roof? I was thinking about a flat roof but I figured the cost would be greater than just getting four steel trusses and doing a simple gable roof?

Building codes? Snow, rain, wind, what's going on outside? This is a simple support structure meant to hold up punching bags. It isn't meant to be holding up a wall or anything. Building codes outline how to "properly" install a punching bag hanger in an outbuilding? Anyway, I have discovered...

Depends on what is meant by "greatest". Does that mean "the ones whose music I like the best?" Does it mean "the ones who received the most fame and publicity?" Does it mean "the ones who are the most innovative and influential on other musicians?" Personally, I put the top 3 like this: 1. Jimi...

I am planning to build a 30x20or24 building that will be used as an exercise gym. One thing I need to find out, and for which I have searched the retardnets to no avail, is the answer to the following question: With an open span of 20 feet plus I guess an 2 additional feet on each end for the...

I got the car back to the house today. I figure I'll just figure stuff out on my own with the help of the forbbodiesonly experts and Uncle Tony over on Youtube. :) Looking at the car, it really isn't that noticeable unless you are looking for it. What ticked me off today (ha!) was noticing the...

So I have had 1 body man, and 2 different shops that specialize in suspension look at the car, took measurements, etc, and nobody can figure out why the wheels are all offset to the passenger side by about 3/4-1 inch. Next stop is another body shop that has one of those fancy frame alignment...

So, got the wheels and rims on today. Noticed that the tires on the passenger side are further to the outside of the car than the tires on the driver side. Both front and back. Tomorrow I will measure the backspace of the wheels to make sure ProComp didn't send me some two different sets of...

...fit. At least I won't be driving around with naked hubs, ya know? Can't let anybody see my grease caps. That would be disgusting, amirite? I swear, the absolute lack of everything remotely normal these days drives me batty. We're definitely in the end time can't-get-sh*t-done generation.

Niiiice. If you ever want to sell those rims off that last car let me know... :)

Wow, I really appreciate the help you've given! Seriously, you're helping me out quite a bit here.

So is that a #7 or #8? Number 8 by 2 inch? This helps a lot by the way. (thumbs-up emoji thing goes here)

"73-4 Charger grill mounts complete w/ hardware 75.00" What exactly are "grill mounts"? My 74 Charger SE needs the screws to mount the grills to the body, and the bolts to mount the inner shroud thingies to the grills. Would these grill mounts include those fasteners? If so, then how do I send...

Ok... so no luck at the local hardware store (which usually has ANYTHING no matter how obscure or hard to find). Home Depot definitely didn't have anything. Online, I see 71-72 grille fastener kits, but no 74. So I am wondering if the hardware for a 71 or 72 grill would fit a 74 SE? OR if maybe...

Thanks!

Does anyone know where I can get the information/specs for the fasteners (screws) that attach the grill to the car? Also for the ones that attach the headlamp shroud thingy to the grille? (There's the grill, the inner shroud thing, and then the "cups" that fit to the inner shroud. I need to know...

Guy has a 318, says he's had it for years, says it's "complete" (whatever that means), says he'll let me have it for 300 bux, says if I don't get it by the weekend it's going to be sold for scrap. Is 300 a normal/average price for a 318? I don't NEED a 318, but hate to see old stuff go to the...