Search results for query: *

I used aircraft paint stripper on this piece. It took the paint right off in about 15-20 minutes - no damage to the metal.

And a mask, this stuff has a strong odor!

I haven’t been able to work much on the car with my son’s indoor track and daughter’s hockey schedules on the weekends. Both were off today so after snow blowing the driveway, I sprayed undercoating on the back-half of my car. I will do the front once the front valance and associated slash...

Of course ‍

I bought the same one a while back to replace missing sockets. Good set for the price!

A few of the “insiders” on YouTube have reported that there already is a test mule charger with the hemi going through, well, testing. It’s been confirmed that a V8 fits in the new charger. And, there may be a hellcat option for the 300.

I have a 2021 RT. I’ve had it since new. Plenty of power and very comfortable on long trips. The only complaint I had was the plastic cover on the rear view mirror base would rattle a little sometimes. A small piece of 3m double sided tape fixed it.

Update: A month later and my mix is still working. This part wasn’t as rusty/pitted as the last parts I tested but, the solution worked just fine. I let the part sit for about a day and a half. Before: After: Nice!

-1 here this morning

I started installing the bodyplugs in preparation for spraying the undercoating. This was a bit of a PITA because some were missing from my car so my reference photos weren’t as helpful as I hoped. I was able to find a few images on the internet that helped. I thought I’d document where they go...

Movie cars: Cannonball Run: Mad Max: Bond:

These are the ones that did it for me as a kid:

Ann-Margret!

That's great news! Glad to hear it!

Kim:

Raquel!

I repaired the flange on one of the valance to fender filler panels and a section of the corner on the other. I haven’t touched my welder in months! Flange replaced: Corner: Not much but better than nothing I guess.

I used GooGone to remove a few big globs of undercoating. I spray it on heavy, cover in Saran Wrap and leave overnight. The undercoating then comes right off with a plastic scraper. That’s the only thing I did before dropping them in the solutions. I also get a black film on the parts after...

I decided to test the citric acid mix against Rust911 as they cost almost the same. I had another set of the same parts I used before. These were much more heavily rusted and pitted. Rust 911 states that it should be used above 65 degrees so I placed the container I used in my furnace room. I...