Search results for query: *

Hello, was going to have a cam done by Shane at crower but it won't work for my build so if anyone is interested its a core 50mm 4-7 2-3 swap core that is set on a 106lsa. So we can change it to 108 lSA max. Hes on forabodiesonly dart19666 or [email protected] just passing your along, it a...

Some people have shown interest in these for fiberglass doors, to have to look and adjustability of a stock type hinge. Jerry at SD Concepts said he can make them from aluminum just seeing what most people would want. So here's the poll. Jerry says for cost to stay down its better without the...

Finally got it to fire up, still messing with timing a bit, sorry for the crappy speakers. 440 +.060 Ported stealths Ported M1 1050 dom KB 11.75:1 comp steel crank with h beam rods all balanced super comps MSD 7al with MSD pro power hcv coil mopar race wires built 727 Dana 60 4.56 w/ locker...

Okay wondering who all is running one of these, I got everything ready to finally start the motor, and now my a2000 pump with the regulator on the pump it self all the way out and the a2000 regulator 4 port one, even that's all the way out and the fuel pressure gauge goes to 32psi when pump is...

I posted a thread over in the model year thread just thought I put it here as well since it's more of a racer things. I wrote to usbody source about doing more fiberglass for these cars since the place in Canada is a shaddy from reviews, but I've wrote usbody about fenders, and bumpers for these...

Just wondering if anyone knew if a company made some aluminum block off plates for the heater box, wiper motor and stock fuse block? I don't really have the tools to cut to make my own. But would like to block all this off since I removed it all.

As thinking of using 20w/50 with lucus break in oil for a while then go full synthetic, or should I just go with racing oil like 45w. Hope to finally start up this motor soon

I was just wondering if there would be any benefit to use -4 or -3an steel braided hose for the whole system or just use stainless steel hard line with the flex steel braid hoses to connect to the calipers? I want to redo the whole brake system lines, going to go with a hydra boost master as...

As for most lot of us remove our heater a/c boxes for less weight. Well I mounted my msd 7al-2 under the opening to allow the incoming air to help cool the electronics. Now the lip that is in the cowl isn't that big and wondering what seal to add to gain some height so when I wash the car I...

Just ordered my new steering column only weights 9 lbs

I just bought a painless 8 switch fused panel to go into my car to power everything. Now I wouldn't need to buy another whole car wiring set up cause the painless can take care or everything right? I has switches for ign, start, x2 fuel, water, fan, light, and accessories.

Well after trying everything my dad and I know and all new stuff installed. Had to call strange or email and they said that I have the wrong carrier turns out I have a series 5 locker and need a seires 3. Now mine is in awesome shape barely used when I bought from a guy off craigs list he...

Now I just hope the pic load they look awesome.

Recap on my set up 440 +.060 (with some to spare) stealth ported heads with 1.7 roller rockers, isky 292 509 cam, ported m1 with a 850dp, hooker sc 2" prim 3.5" collectors. My question it will be pretty much mostly track car will going 3.5" exhaust hurt with a 3" cross over h pipe? I noticed...

I bought some fiberglass doors from us body for my 72 sat they finally came in yesterday. Haven't opened the box yet but wow only weight 32lbs each. Now just need to order the aluminum panel and latch assembly and the frame for the lexan glass. Will post pics later

Starting to second guess my 850, set up is: 440 .060 over, kb pistons were 10:1 (bought for 906 size combustion chambers) now have ported stealths, ported M1, isky 292 cam with 1.7 roller rockers, steel crank and H beam rods. 727 upgraded internals mild, dana 60 with 4.10s and a locker. Hughes...

I got this along time ago, it was published in I believe Mopar Mag, or Mopar Muscle, but its by Henry Keshena Seestedt: Starter whines, engine roars, Feel the horses through the floor. Choppy idle, racing cam, Pounding ground, it's no sedan. Helmet on, pull strap tight, Rev the engine, feel...

I got one out of a GMC truck, bought new axle tubes for it, now I know a stock housing end to end is supposed to be 57 3/4 inches. How much smaller can I go with off set shackle kit? I also have some 15x10 with a 5.5 offset coming in, but won't be shipped to me until next month maybe. Ill be...

I'm picking one up tomorrow from a guy off cl. Can they be rebuilt or is there anything to rebuild on them, they guy says he pick it up from a rear end place that was there. I know they are a ractching type unit.

Well got the heads finally on had to wait for the studs to come in, course now I can't find my other intake gasket. Always something. Motor is a .060 over 440, h beam rods with a steel crank, ported stealths and ported M1 with a welded valley cover, isky 292 cam, hooker super comps, I have some...