Search results for query: *

Hey guys, working on some hl bezels for a member here and one got a hole from a pit not seen from under the factory bright dipping. Anyhow, I to welded it and **** went down hill real quick. I need one. It’s for the outer big headlight. I don’t mind if it’s dinged, I just need it. Let me...

Working on a 64?Plymouth grille for a member and it took a crap. A pin hole that I thought was buffing compound turned out to be a hole and i tried to fill it, but it got bigger. So, I’m in need of a grille or the vertical piece in the center. Let me know what ya got!!

Looking for a factory lock ring for the fuel sending unit. These POS aftermarket ones suck and are to small/thin. Let me know.

Looking for a Dana 60 to cut down for an A body. Since I got one, my buddy wants to do the same. Looking for a 3 inch or 3.125 tube diameter with a sure grip, posi, lsd, etc. and 3.73’s or 3.55’s. None of that stuff is a detriment, but it has to have either tube diameter. If it’s a full...

I need the piece of steel that has 3 holes, 2 are used to bolt to the head and the 3rd is for the long alternator bolt. Not sure what that piece is called exactly, but nonetheless, I need it. Let me know how much. Thanks!!!

I'm in need of the thick metal piece that bolts to the head to allow the alternator to fit right with ac. I'm kinda in a hurry on this, need it by next weekend. The piece has 3 holes, 2 are drilled so it can bolt to the head and the top hole is threaded for the alternator bolt. Thanks!!!!!

I'm looking for a flywheel for a 10.5" clutch and this is for a 383. I don't mind if it needs a "LIGHT" resurfacing. Let me know whatcha got and how much.

I need 1 fender strut bar. It goes from the bottom of the fender to the front bumper bracket. This is for a 70' RR. If I need to get both that's fine also. Thanks!!

I need a set of valve covers for a 1970 RR 383. Send me a pm or post a pic of what you have. Thanks!!!!

I'm in need of a brake pedal assembly stud that is pressed in and goes thru the firewall. I only need 1, but if I need to buy all 4, then so be it. I know I could just weld another bolt in place, but would rather use a factory set up. Let me know what ya have and how much. Thanks!!

This might be a long shot, but I'm looking for the top center hood skin that has a bulge, ie, super bee etc! I have an idea that I would like to try on my dart and need some help locating what I'm looking for. Let me know what you have and cost.

Anyone have what I need? The one on my car is MIA.

I'm in need of a crank bolt and washer for a 383. Let me know if ya have 1 and how much. Shipping to zip code 93230. Thanks!!

Looking for a dist. drive gear for a big block, or intermediate shaft, whatever it's called. let me know what ya got and price. Shipping to zip code 93230. Thanks!!

I'm looking for a pass side grille surround for a 67 Coronet. The one I'm working on is FUBAR and after having put about 20 hours into it, it's just beyond help. The grille is for another member, so be gentle on price if ya have one, lol!!

Looking for a set of door locks for 1962-65. If ya have have some and want a reasonable price, send me a pm.

Need a grille for a 64' Dodge b body. It needs to be semi decent and affordable. I looked at one at the Fall Fling in Van Nuys, the seller was/is on meds/drugs....his asking price was 175 and after talking for a bit, he came down to 125, I passed. If ya have one and just need to get it gone...

My dad needs the drivers side lower control for his e body. Would like to get one with the sway bar tab, but without will do either way. Send me a pm with your price and what ya got and we'll go from there. Thanks...

I need these parts as mine are screwed up and I dont have the key for them anyway. I could use the 66-70 b body door locks, but the hole in the door has to be opened up and I'm gun shy on doing that. Let me know what ya got and how much. Thanks....

Looking for a windshield for a 64-65 2 door hardtop. It's got to be in useable condition, no cracks, holes, chips etc. Keep in mind new ones are not that expensive, so if you got one let me know and we'll go from there.